Cardiff Goat Pro Carbon Splitboard + Karakoram Prime-X + Split Interface Splitboard Bindings + evo x Pomoca Pro Glide Splitboard Skins
Model Info
Cardiff Goat Pro Carbon Splitboard + Karakoram Prime-X + Split Interface Splitboard Bindings + evo x Pomoca Pro Glide Splitboard Skins
MEMBERSHIP
Earn up to 10% back in rewards. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
Product Info
Cardiff Goat Pro Carbon Splitboard 2026
The Cardiff Goat Pro Carbon Splitboard is made for those who live and breathe mountain exploration. Cardiff's TITANcore blends Poplar and Paulownia woods with vertically laminated Titanal, creating a mind-blowing fusion of lightweight responsiveness and unshakeable stability. Whether you're hunting first tracks or navigating technical terrain, the Goat Pro Carbon isn't just a splitboard—it's your pass to backcountry freedom.
Product Details
Rocker Type
HALFcamber60 – The Cardiff HALFcamber places camber where it is absolutely necessary and gradual rocker everywhere else. The result is maximum glide, maneuverability and edge control. HALFcamber60 means 60% of the running surface is cambered.
Flex
PROflex (1 Soft - 10 Stiff) – 150cm: 5 // 154cm: 6 // 158cm: 7 // 162cm: 8 // 166cm: 9
Shape
RADIcALSIDECUT™ – Blend of Radial and Progressive sidecuts are used on all CARDIFF boards to give each board a unique character.
PERFECTpivot™ 3.0 – Perfect Pivot matches sidecut to rocker profile for each board to allow maximum performance
Core
TITANcore™ PP – Cardiff Pro Carbon series cores feature poplar-paulownia construction with vertical layers of Titanal in-between. This adds dampening to the precise and responsive carbon.
FULLplank™ – Cardiff splitboard cores run tip to tail with special reinforce-ments in the binding and touring hardware locations.
Laminates
CARBONfiber100™ – A blend of uni-directional and triaxial carbon fiber above and below the core for a super light responsive build.
Sidewalls
UNIwall – Seamless urethane sidewalls fuse to cores to create the most durable and damp ride available - featured on Enduro Series decks.
BORDERpatrol Technology – BORDERpatrol technology uses poplar stringers which fuse with the UNIwall seamless urethane sidewall to reinforce the edge and provide an incredibly damp ride.
Base
RACEbase™
Graphics
Art by Sam Bawden
Specs
-
Terrain:
Splitboarding
More
Terrain
Splitboarding A splitboard snowboard is built specifically for the backcountry rider. Splitboards are designed to break down into two separate halves for touring and uphill travel (with climbing skins). Special bindings are required as well. Once you've reached the top of the terrain feature, you reconnect your splitboard for the ride back downhill. However, it's important to note that you will need appropriate backcountry tools, knowledge of the backcountry, weather and snow conditions and climbing skins to safely take advantage of the freedom of a splitboard.
-
Ability Level:
Advanced-Expert
More
Ability Level
Advanced-Expert Whether you charge the steepest lines, hit the biggest jumps in the park or carve with race-like precision, advanced to expert level skis, snowboards, boots and bindings are for the more aggressive rider. In skis and snowboards, you'll often find layers of metal, carbon or other stringers for rigidity and power, while advanced to expert level boots and bindings are usually on the stiffer side of the spectrum for rebound and precision steering.
-
Rocker Type:
Rocker/Camber/Rocker
More
Rocker Type
Rocker/Camber/Rocker Rocker/Camber/Rocker shapes seek to give you both hard-carving edgehold on firm snow from camber underfoot with enhanced turnability and float in powder from the rockered tip and tail. This profile is increasingly popular for freeride boards designed primarily for soft snow.
- Shape: Directional
-
Flex Rating:
Very Stiff
More
Flex Rating
Very Stiff The amount a snowboard flexes varies significantly between boards. Snowboard flex ratings are not necessarily standardized across manufacturers, so the flex may vary from brand to brand. Many manufacturers will give a number rating ranging from 1-10, 1 being softest and 10 being stiffest. Here at evo we have standardized the manufacturers' number ratings to a feel rating ranging from soft to very stiff. Generally you will find flex ratings of 1-2 as soft, 3-5 as medium, 6-8 as stiff, and 9-10 as very stiff. Flex ratings and feel may ultimately vary from snowboard to snowboard.
- Core/Laminates: Carbon, Wood
- Warranty: 2 Years
| Size (cm) | 156 | 158 | 162 | 166 |
| Effective Edge (mm) | 1220 | 1260 | ||
| Tip Width (mm) | 301 | 306.1 | ||
| Waist Width (mm) | 265.5 | 270.5 | ||
| Tail Width (mm) | 289.8 | 295.4 | ||
| Sidecut Radius (m) | 11 | 11.5 | ||
| Stance Setback (mm) | 17 | 17 | ||
| Width | Wide | Wide | Wide | Wide |
Karakoram Prime-X + Split Interface Splitboard Bindings 2025
Karakoram's quest for the ultimate splitboard binding has yielded some spectacular results, perhaps none so worthy as the Karakoram Prime-X + Split Interface Splitboard Bindings. Essentially the same binding as the X-Carbon but with a slightly softer highback and red anodized hardware instead of gold, the Prime-X is ultra light and ultra tough as the same time.
Product Details
Tour Mode
Tightest and Smoothest Pivot – Precision sleeved tour axle is held in place with active joining
Dualspeed Riser – Adjusts with a pole basket to 3 heights
Dual Ride Stride – Adjusts to -8˚ for touring
Ride Mode
Ride Mode 3.0 – Drop-on changeovers, Active Joining for instant response and direct power transfer and Seam-Lock between the two baseplate elements to eliminate underfoot movement
Drive Mode – User adjustable forward lean of between 0˚ and 22˚
Surf Mode – Activated without unstrapping; 11˚ or 0˚
Baseplate
7075-T6 Aluminum Open Chassis
Wide Contact Points – Direct Power Transfer
Asymmetric Heel Cup – Support for the up and the down
Straps
Airpod Straps – No pressure points
Buckles
Carbon Buckles
Super Pivot Ratchets
Highback
Carbon Nyolite Highbacks
Compatibility
Compatible with Standard Splitboard Inserts
Additional Features
Splilt Connectors Included – Quiver-Connectors for solid boards available separately
Highback Stiffness – 7 (1 = Soft, 10 = Stiff)
Custom Anodized 7075-T6 Aluminum and Grade 5 Titanium Screws
Hollow Core Grade 5 Titanium Pins
Made in North Bend, WA, USA
Specs
-
Ability Level:
Advanced-Expert
More
Ability Level
Advanced-Expert Whether you charge the steepest lines, hit the biggest jumps in the park or carve with race-like precision, advanced to expert level skis, snowboards, boots and bindings are for the more aggressive rider. In skis and snowboards, you'll often find layers of metal, carbon or other stringers for rigidity and power, while advanced to expert level boots and bindings are usually on the stiffer side of the spectrum for rebound and precision steering.
- Mounting Pucks: Yes
-
Made in the USA:
Yes
- Warranty: 2 Years
| Size | S | M | L |
| Weight (g) | 550 |
evo x Pomoca Pro Glide Splitboard Skins
If you're looking for the best skins in the business, there's one name that stands out from the pack. That's why we partnered with Pomoca to produce the evo x Pomoca Pro Glide Splitboard Skins. Engineered for versatility across the full range of backcountry conditions, these skins combine Pomoca's super grippy mohair / nylon Climb 2.0 plush with their premium Glide treatment for optimal skin track performance. From mid-Winter pow missions to the Spring corn harvest, the evo x Pomoca Pro Glide Splitboard Skins are ready to rumble.
Product Details
Material
70% Mohair / 30% Nylon
Ever Dry 3.0 DWR – PFC-Free
Tip and Tail Attachments
Ready2climb – The ready2climb skin can be cut to a specific ski in just two minutes without any special tools. The adjustable loop can be fixed to any type of ski.
Features
Grip – Pomoca uses a combination of materials and weaving techniques to combine glide and durability with gripping power. Proper alignment and the fiber attachment systems make Pomoca skins very stable under all conditions and for the life span of the skin.
Glide – This exclusive process gives ski tourers extra glide with less effort. This treatment, applied at the end of the production process and to to entire length of the fiber, makes the skin glide and resist moisture more effectively. Skins with Glide offer an effective process for the entire life of the skin, and unique anti-glopping performance.
Safer Skin Light – Pomoca has succeeded in making it's classic Safer Skin membrane lighter. Thanks to finer layers in the membrane, Safer Skin Light is 12% lighter (150g / m² less). Safer Skin Light makes each pair 60 - 75g lighter, while remaining 100% waterproof and providing slightly less wear resistance.
Includes Pomoca Skin Trim Tool and Storage Bag
Compatibility
Trim to Fit Any Splitboard
Proposition 65 Warning for California Consumers
This product may contain chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm.
Specs
- Material: Mohair/Nylon
- Compatibility: Trim to Fit
- Warranty: 365 Days + 1
| Size | 145 mm x (M) 158-168 cm | 145 mm x (S) 149-159 cm |
| Width (mm) | 145 | 145 |
| Length (cm) | 158 - 168 | 149 - 159 |