Camber – This is the classic camber profile where the center of the board is raised off the snow, and the contact points are closer to the bindings.

Flex Rating – 8 (1 Soft - 10 Stiff)

Sidekick Technology – Sidekick technology elevates the edges at the widest points of the board’s nose and tail, minimizing the risk of catching an edge. This design enhances forgiveness during rides, ensuring a smoother experience. Particularly beneficial in powder snow, Sidekick optimizes floatation, by flushing snow outwards. It also helps preventing unexpected edge catches when riding on a flat base.

Twin

Full Poplar – Yes.'s baseline core for tip-to-tail woodcore snowboard construction. A core that strikes a predictable balance between durability and consistent flex and lightweight feel.

Fridge Master XTRM – The carbon stripes go from one insert pack to the other. it creates a strong a reliable platform in between your bindings. This will allow stability at high speed and in powerful turns while leaving the tip and tail soft and playfull for butters and presses

Y3D Comp – The Y3D competition is the closest to a traditional flat cambered board but don’t be fooled it is packed with benefits and easy of mind. The Y3D comp will give you confidence to progress onto the pro-line. It has all the support and you will need while it is also much more butter friendly than your flat board hence you will see Fridge and Halldor ride it in Knuckle Hucks etc. Wide center base for stability on rails and obstacles. Low side base uplift for max edge engagement. Late start of the side base uplift for maximum control

Sintered Spec – The raw material is pre-consumer recycled (meaning it never left the factory) sintered base material. The heating and extrusion process softens it slightly, but it's still much harder than true Extruded.

2 x 4 Inserts

Flex Rating – 6 - 7 (1 Soft - 10 Stiff)

Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.

Hanger 3.0 Nylon Reinforced with 30% Glass Fiber – The new Hanger H3 features a wider bushing footprint that is closer to the board’s edges for enhanced board connection and faster energy transfer. The H3 also encompasses a reduction in weight, a dropped-down inner lateral wall for better ankle mobility, and is able to accommodate bigger volume boots. To top it off, it also has a new kingpin tool-less 2.0 that is more integrated and user friendly.

Canted 2.0 Footpillow

Post – Nylon with 50% Carbon Fiber

Freestyle Highback – Symmetrical geometry, minimal top curve for extra mobility, hidden flex hinge at the top 1/3, and Top Flair, which dampens chatter and eliminates calf-bite

Hyperfuse II Strap – The HYPERFUSE II strap is an evolution and a design refinement over the original. Inspired by shoe construction, the HYPERFUSE II is a stitch-less, spineless strap. Its inner guts are constructed with nylon webbing that is strong, durable and flexible, and sandwiched between two layers of EVA.

Pro-Grip Toe Strap – Non-slip and grip is what you have with the Pro-Grip Toe Strap. Ultra grippy, moldable, and can be used on the tip or toe of your boot.

Tool-less Adjuster Straps

Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.

Toe Hinge Connector

Nylon with Glass Fiber Buckle Levers

Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.

Bushings – Comes with Medium (45 shore), and Hard (55 shore) Bushings

Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong