MEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
The park is for kids, no doubt about it, and with the Lib Tech Mini Ramp C3 Snowboard under your feet, you're gonna own it. A cambered board with tons of pop and a 75% Aspen / 25% Paulownia wood core, the "Mini" uses all the same goodies as the regular Off Ramp boards but sized down for young folks.
Medium – The most versatile flex in the game for peak performance all over the mountain.
Original Power Construction – 75% Paulownia / 25% Aspen
Triaxial / Biaxial Fiberglass
Birch Internal Sidewalls
UHMW Tip / Tail Protection
UHMW Sintered Sidewalls
Eco Sublimated Co-Ex
Magne-Traction® – Strategically located edge serrations provide unreal edge hold and control in all conditions. Turns ice into powder.
Eco Sublimated Poly Top – High strength, impact resistant, lightweight dimensionally stable UV and temperature resistant top material decorated using an environmentally friendly eco sublimation process.
Art by Phil Hansen
Mervin Made – Hand made at the Mervin Factory in Washington, USA with zero hazardous waste.
2 x 4 Inserts
Size (cm) | 132 | 137 | 142 |
---|---|---|---|
Effective Edge (mm) | 960 | 1000 | 1050 |
Tip Width (mm) | 266 | 272 | 278 |
Waist Width (mm) | 232 | 236 | 241 |
Tail Width (mm) | 266 | 272 | 278 |
Sidecut Radius (m) | 7 | 7 | 7.5 |
Stance Setback (in) | 0 | 0 | 0 |
Stance Range (in) | 17.5-21 | 17.5-21 | 18.5-23.5 |
Width | Regular | Regular | Regular |
It was only a matter of time until they outgrew the kiddy setup. Get them on the Yes. NX-Gen Snowboard Bindings and watch their skills soar. These fully featured binders are made for freestyle and all mountain riding thanks to their hanger 1.0 construction, medium soft flex, and fully featured chassis that can handle the trial and error of learning jumps and tricks in the park.
Flex Rating – 4 (1 Soft - 10 Stiff)
Flushcup Technology – Designed to hold boots even without a highback, these have a flush inner surface where the highback meets the heelcup. This gives direct energy transfer between boot and binding.
Hanger 2.0 is Nylon with 30% Glass Fiber – I-Beam wall sections are both rigid and light. Baseless design allows for uninterpreted board flex. Transfers energy to the board’s edges
Post – Nylon with 30% Glass Fiber
FM Highback
Asym-FS Strap – Less is more! This minimalist ankle strap features the same geometry footprint as the FRS strap but in a much more mellow environment. If you’re looking for a softer strap but still want comfort, durability and Flip-it functionality, then this is the one’s for you!
3D Stretch-Fit Toe Strap – Sometimes what works best is a simple, streamlined, minimalist design. A 3D strap with Stretch-fit technology allows for better toe cap fit.
Ankle Hinge Connector – A minimalist but strong hinge design allows your straps to move out of the way, with a stop mechanism to prevent them flopping around.
Toe Hinge Connector
Tool-less Adjuster Straps
Nylon with Glass Fiber Buckle Levers
Skate Tech – Inspired by how easily and efficiently a skateboard turns, Skate Tech mimics the function of skateboard trucks. Traditional bindings diminish energy transfer by flexing and bending the baseplate, forcing you to crank straps down harder, ride with more forward lean, or run taller and stiffer highbacks. Skate Tech bindings bypass the middle of the snowboard and direct your energy right onto the board's edges, transfering more power to the board with less work.
Highcup Compatibility – Compatible with all YES hangers. Low profile for extra flexibility. Street, park and pow.
Combo Mounting Disc 4x4 - Channel – Mounting disc is Nylon reinforced. 4x4 and Channel compatibility. Minimal board fixture. Light and strong
Bushings – Available in Soft (40 Shore)