ON3P

ON3P Cease & Desist Skis 2020

SKU# EB-165528-1001

$734.61

$1,119.50

Shipping

Not available for shipping

Find in Store

Checking availability...

Earn up to 10% back in rewards

Join Free

Free shipping on orders over $50

Details

Lowest price guarantee

Details

366 Day Return Policy

Details

ON3P Cease & Desist Skis 2020 184 cm $734.61 ~~$1,119.50~~

ON3P Cease & Desist Skis 2020

When you break it down, the ON3P Cease & Desist is built to provide you with the best day of your life; the one you lose hours daydreaming about and hope to repeat every time you check the snow report. Boasting 124mm underfoot and plenty of rocker, these pow sticks have unparalleled float in the deep stuff, but what sets them apart is the asymmetrical tip taper and offset tip shape which work together to maximize maneuverability in 3D snow and allow the skier to smear turns without feeling hooky. Make sure you have the right tool for when the pow starts nuking and pick up the ON3P Cease & Desist. "Best day ever" comes as standard.

Shop More ON3P

Product Details

Rocker Type:

Freeride Rocker: Larger tip rocker combined with a shorter, lower tail rocker and camber underfoot. Great for driving the ski while maintaining the stability needed to remain confident at speed.

Sidecut:

Reverse Elliptical Sidecut: RES is a large, convex elliptical arc that runs from boot center to tip taper, combined with a long, traditional radius in the tail. The goal is simple: create the best soft snow sidecut and shape available.

Shape:

Asymmetrical Tip Taper: A longer, extended tip taper on the outer edge of each ski combined with a shorter tip taper on the inner edge of the ski. ATT enhances the ski's ability to smear in soft snow by removing surface area from the outside edge of the uphill ski during a turn in soft snow. The inside edge remains supportive and allows for the downhill ski to complete a full turn as originally designed. Asymmetrical Tip Taper

Offset Tip Shape: OTS shifts the center of the tip and tail toward the inner edge of each ski. Shifting the center line on the ski allows ON3P to maintain the surface area and optimal float while increasing the effect of the Asymmetrical Tip Taper on the outer edge of the ski. This helps with smearability and makes it easier to roll over and maneuver in deep snow. Offset Tip Shape

Core:

Bamboo Core: The heart of every pair of ON3P ski is a FSC-certified, vertically laminated, 100% bamboo core. Bamboo provides a responsive, yet damp characteristic to their skis that everyone has grown to love.

Laminates:

Carbon Fiber: Provides strength, rebound, responsiveness, and stiffens torsionally and longitudinally.

Tri-Axial Fiberglass: 19 oz or 22 oz tri-axial fiberglass provides torsional and longitudinal stiffness, ensuring proper edge hold and power transfer.

Extra Wide Binding Mat: An additional layer of fiberglass mat prevents pullouts. To ensure proper coverage for all types of hole patterns, ON3P runs their mat full width on every ski they make. Their binding mat is double-biax fiberglass, increasing torsional stiffness.

Vibration Dampening Strips (VDS): VDS rubber is applied to the edges and sidewalls, acting as a shear layer that provides improved bonding strength and vibration dampening.

Sidewalls:

UHMW Sidewalls: UHMW (Ultra High Molecular Weight Polyethylene) is an incredibly strong material, has a higher abrasion resistance than steel, and resists cracking.

Base:

1.8mm 4001 Durasurf Sintered Base: ON3P's Durasurf 4001 base material provides their skis with better glide and protection from damage compared to any other sintered and extruded base material, and is 50% thicker than the industry standard.

Edges:

2.5mm x 2.5mm Extra Thick Edges: ON3P uses a 3/4 wrap for their 2.5mm x 2.5mm Rockwell 48 steel edges. The 3/4 wrap allows the tips and tails of the skis to flex, decreasing the risk of delamination.

Graphics:

Nylon Topsheet: Sublimated nylon topsheet is chip-resistant to ensure you always look your best.

Additional Features:

Made in Oregon: Every single pair of ON3P skis is built by an ON3P employee in their Portland, Oregon factory. No shortcuts of OEM here -- they do it themselves. Design, build, sell.

Binding Compatibility:

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.