CamRock Rocker Profile – A rocker-camber-rocker profile with plenty of rocker at both tip and tail - perfect for butter and jib moves at any speed, as well as smooth and stable switch riding.

Flex Rating: 7 (1 Soft - 10 Stiff) – Medium-stiff flex for immediate response and loads of control. Less forgiving but is ready to damage rails, kickers, and anything else you toss at it. Well-rounded flex for all-mountain excursions.

Twin Directional – Symmetrical tip and tail dimensions with a 20 mm setback for the best balanced freestyle performance in the land

Blunt Nose – "How a board glides in powder, crust, corn, or any snow condition more then an inch deep is dictated by its front contact point and just past it. Next time you are in soft snow, watch how much snow comes over the corner of the nose near the contact point. The billowing snow means you are plowing through it which is obviously slowing you down. By adding a blunt nose, you get the float benefits of a much longer board tip without the added length or swing weight." - Jeremy Jones

Progressive Sidecut – At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually decreasing the side cut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Mountain Core 2.0 – Dual density hard wood core with beech stringers positioned at the edges for pop and durability.

Fiberglass Reinforcement – A new lightweight layer of fiberglass not only adds to the pop in the nose and tail of the board but improves the longevity of the flex profile.

Triax Fiberglass – Multi-axis, stitched fiberglass laminate for a precise ride in any snow conditions.

Sintered 7000 Series Base – Sintered bases contain tiny pores in the structure that hold wax better and result in the fastest running surface known to humankind; Jones' 7000 series bases have added carbon to add speed.

Belt Ground Finish – Smooth a flat right from the factory.

Die-Cut Base – Base color displayed may not be available. Base colors may vary.

Mellow Magne-Traction™ – A tiny wave in the edge under your feet results in a catch-free ride with bomber edgehold on any snow surface. "Magne-Traction™ is a key ingredient for rockered board designs. Adding rocker to your board makes it glide more smoothly, but it makes it harder to really lock into your turns and hold a solid edge. Magne-Traction™ is crucial to offset the drift typical of rocker flex patterns." - Jeremy Jones.

Oversized Recycled Edges – Recycled, thicker steel reinforces the snowboard's edges to give you exceptional impact resistance and improved production sustainability.

Film Topsheet – New film topsheet adds to consistent response and drops weight at the same time.

Himalayan spine wall graphic by Joseph Toney.

Factory Tuned – Factory de-tuned at the tip and tail so you can charge from run one without worrying about hookiness.

One Ball Jay BIO Wax – Factory waxed and ready to shred right out of the shop with One Ball Jay BIO wax.

Spin Tip Construction – Thin tapered cores and no sidewall at the tip result in reduced spin weight and better butter-ability.

2 x 4 Insert Pattern