Camber – Camber is the base of snowboarding: you need to have enough edgehold to drive in and out of turns. The camber does exactly that, allowing you to drive your turns longer and release later.

Flex 9 – (1 Soft - 10 Stiff)

UnderBite – UnderBite edges re-distribute a rider’s weight in such a way that it enhances turning ease and edge hold. Creating divots inward at the binding area reduces and disrupts the surface area of the edge that has contact with the snow while the board is turning. This increases the edge pressure by distributing your weight/energy in the areas where you need it - from the binding out, and through the center of the board where the carving arc is taking place. This segmentation of the sidecut into 3 key zones focuses your body weight onto areas that initiate, hold and release turns.

Poplar / Paulownia / Bamboo – Creating a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.

Triax – Robust torsional flex.

Sintered True – Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.

2 x 4 Inserts

Tightest and Smoothest Pivot – Precision sleeved tour axle is held in place with active joining

Dualspeed Riser – Adjusts with a pole basket to 3 heights

Dual Ride Stride – Adjusts to -8˚ for touring

Ride Mode 3.0 – Drop-on changeovers, Active Joining for instant response and direct power transfer and Seam-Lock between the two baseplate elements to eliminate underfoot movement

Drive Mode – User adjustable forward lean of between 0˚ and 22˚

Surf Mode – Activated without unstrapping; 11˚ or 0˚

7075-T6 Aluminum Open Chassis

Wide Contact Points – Direct Power Transfer

Asymmetric Heel Cup – Support for the up and the down

Airpod Straps – No pressure points

Carbon Buckles

Super Pivot Ratchets

Carbon Nyolite Highbacks

Compatible with Standard Splitboard Inserts

Splilt Connectors Included – Quiver-Connectors for solid boards available separately

Highback Stiffness – 7 (1 = Soft, 10 = Stiff)

Custom Anodized 7075-T6 Aluminum and Grade 5 Titanium Screws

Hollow Core Grade 5 Titanium Pins

Made in North Bend, WA, USA

Mohair / Nylon Blend – Kohla Austrian construction makes the lightest most durable plush, with the perfect balance of grip and glide.

Wire Rope Tip Clip – Easy install and removal from tip of board.

Universal Tail Clip – Fits to multiple splitboard tail configurations.

Easy Peel – Kohla Smart Glue Technology allows for optimal adhesion while being easy to separate.

Waterproof – Sealed with Kohla’s Patented PFC-free Vulcanized Rubber. Prevents water absorption. Keeps skins sticking to ski base in Spring conditions.