Skip to Main Content

Salomon Pillow Talk Splitboard 2022 + Spark R&D Surge Splitboard Bindings - Women's 2022 + Spark Pucks

sku# 231563
Salomon - Pillow Talk Splitboard 2022 + Spark R&D Surge Splitboard Bindings - Women's 2022 + Spark Pucks
Model Info
This item is

Out of Stock

But fear not - there is plenty to explore...

Shop all Salomon Shop sale Salomon

Product Info

Splitboard

Salomon Pillow Talk Splitboard - Women's 2022

The Salomon Pillow Talk Splitboard is everything you need out of your splitty. It's a super lightweight directional shape with a centered stance and rockered tail, giving it extra versatility and a hint of freestyle feel. The wider design gives you plenty of float for whispering sweet nothings to pillow lines and pow stashes, while the pulled in tail and sturdy flex pattern give you power and reliability for when things get heated. As an added bonus, every board comes with a set of custom cut Pomoca skins, so that's just one less thing to worry about while you're getting your backcountry setup dialed.

Product Details

Rocker Type

Rock Out CamberFlat between your bindings for stability, camber near the feet for response, and rocker on the tip/tail for pressability.

Flex

Flex Rating: 4 (1 Soft - 5 Stiff)

Shape

Tapered TwinStance is centered within the effective edge while the tail is pulled in slightly to help with flotation.

Quadralizer SidecutExplosive combination of Equalizer and Quadratic sidecuts allows high speed carving as well as superior edge control in tight spots.

Core

Ghost Green CoreGhost Green Core components have been selected and designed to optimize pop and reduce weight while utilizing sustainable attributes of a super light paulownia wood.

PopsterPopster's shaped core profile thins out under foot and thickens outside your bindings before tapering again at tip and tail to maximize the natural snap and pop of wood. Feels like your skateboard kicktail finally connected with your snowboard.

Laminates

Biaxial Medium Density FiberglassMedium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.

Sidewalls

ABS SidewallsThe molecular structure of ABS can be described as a concrete bar with rubber nuggets inside, combining toughness for energy transfer and dampening properties for impact absorption.

Base

Sintered BaseAn industry standard for quality sintered base materials. Provides a moderate balance between the speed created by a hard surface and good wax retention.

Fine Stone FinishFine stone finish helps speed up in powder or softer snow conditions.

Edges

All-Mountain Edge BevelA 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.

Additional Features

Includes Custom Cut Pomoca SkinsCustom skins are included for ease of mind use on the mountains and touring efficiency. They come in a specific bag that lets you fold the skin back in just couple of seconds so you don’t have to struggle, even when conditions are less than perfect.

PLUM HooksPLUM hooks are specifically made for high performance splitboarding. Their asymetric profile guaranty a perfect link between all the parts. They are light, easy to use.

Specs

  • Terrain: Splitboarding More 
    Splitboarding
  • Ability Level: Advanced-Expert More 
    Advanced-Expert
  • Rocker Type: Rocker/Camber/Rocker More 
    Rocker/Camber/Rocker
  • Shape: Directional
  • Flex Rating: Stiff More 
    Stiff
  • Core/Laminates: Wood
  • Athletes: Wolfgang Nyvelt
  • Warranty: 2 Years
Size (cm) 145 151
Effective Edge (mm) 1095 1150
Tip Width (mm) 297 294
Waist Width (mm) 247 243
Tail Width (mm) 285 282
Stance Setback (mm) 0 0
Stance Range (mm) 460-580 480-600
Width Regular Regular
Splitboard Binding

Spark R&D Surge Splitboard Bindings - Women's 2022

The Spark R&D Surge Splitboard Bindings take care of business so you can concentrate on the things that matter: like pinning your line and pillaging all that fresh snow. They feature Spark's proven Tesla T1 platform, an integrated Whammy Bar with multiple climbing positions, and lightweight, supportive Pillow Line straps. These things are a marvel of modern engineering and practical simplicity, just snap the toe ramp down and you're connected. When you point em downhill, the solid aluminum baseplates and stiffer Flip'N'Rip highbacks deliver an engaged, responsive ride that ensures you always feel ready to charge. Spark R&D has paved the way, the rest is up to you.

Product Details

Tour Mode

Tesla T1 SystemTesla T1 bindings slide sideways into the offset touring brackets and are locked into place with the snap ramp. No pins, no cables, no fiddle factor.

Whammy Bar Climbing WireA single fatty climbing wire is built into the baseplate with a side arm lever for easy position changes on the steeps. You can switch easily from stowed, to low (12°), to high (18°) and back again while touring.

T1 Heel RestThe T1 Heel Rest catches the climbing wire in the 12° and 18° positions and is specifically designed to hold the T1 Step Locker in place.

Ride Mode

Snap to RideT1 bindings slide across pucks utilizing the snap ramp to lock into place for a tight ride down.

Baseplate

CNC Machined AluminumSolid CNC machined baseplates for maximum stiffness and durability.

Straps

Pillow Line StrapsPillow Line Straps are ultra durable, comfortable, waterproof, one-piece molded construction, and made 100% in-house. Strap pillows are thin and flexible for a comfortable, conformed fit, while thicker ribs are held off the boot and provide stiffness for a uniquely responsive ride.

Buckles

Burton BucklesAll straps incorporate Burton's bomber buckles. Ladders and adjusters are produced in-house with unique thermoplastics that maintain flex over a wide temperature range, performing well on spring tours as well as sub-zero suffer fests.

Highback

Rip ‘N’ Flip HighbacksThe Rip ‘N’ Flip highback is made from proprietary blended materials for strength, durability and light weight. All Rip ‘N’ Flip highbacks incorporate a tool-free forward lean adjuster (FLAD) for complete customization from 0° to 22° in ride mode. The FLAD toggles easily between forward lean position and -13° touring position for easy transitions.

Compatibility

Puck CompatibilitySlide them on and snap the ramp down. Snap the ramp up and slide them off. The most functional way to attach your binding to your board in ride mode, period. Spark R&D bindings are designed to work with all puck compatible splitboard models.

Additional Features

In The BoxBindings, Tesla touring brackets, T1 heel rests, aluminum mounting screws, and Spark pocket tool.

Requires Spark or Voile Pucks - Sold Separately

Specs

  • Ability Level: Advanced-Expert More 
    Advanced-Expert
  • Mounting Pucks: No
  • Made in the USA: Yes
    Yes
  • Warranty: 5 Years
Size XS​/S M​/L
Weight (g) 1306
Splitboard Hardware

Spark R&D Spark Pucks

The new Spark R&D Spark Pucks give you almost unlimited stance options for splitboards with standard insert patterns. The oversized aluminum discs overlap the binding channels for enhanced rigidity and mount strength. Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models.

Product Details

Includes

4 discs and 4 baseplates

Materials

Aluminum / Nylon

Features

Plus or minus .25" (6.5 mm) of heel / toe adjustment for perfect centering

Plus or minus 30˚ angle adjustments

Infinite stance width and setback options

Compatibility

Works with all Tesla and T1 Spark bindings, as well as Blaze and Burner models

Specs

  • Mounting Pucks: Yes
  • Made in the USA: Yes
    Yes
Reviews
Q&A
icon-returns icon-ruler icon-ruler-mini icon-compatibility icon-location