Alpine V1 Profile – The ALPINE V1 Profile design features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider’s performance in deep snow. The camber runs longer in the tail—providing extra power for the ascent or for larger riders drawn to a dedicated wide series.

Directional Flex

Flex Rating – 5.5 (1 Soft - 10 Stiff)

Directional Shape

Parabolic Sidecut – A PARABOLIC sidecut consists of a mirror-symmetrical curve. In snowboard terms, this design creates a board with a deeper sidecut and a quicker turning point in the center compared to radial arcs.

FSC Certified Dual Core™ – The FSC® CERTIFIED DUAL CORE™ was built to achieve the consistent, dependable feel required from riders looking to take their skills to the next level. This lightweight core has zero irregularities and a consistent, uniform flex, combining lightweight Poplar with Beech for increased power and durability.

Carbon Fiber Struts – Increases power and response while remaining ultralight.

Special Blend Fiberglass – This configuration uses an optimum blend of 626g/m2 Biaxial fiberglass laminated in conjunction with structural additives to customize performance objectives.

Magic Bean Resin – This advanced resin system has a bio-content of 60% renewable, agricultural raw material and is produced with no waste or greenhouse emissions. In production, it has a low-temperature requirement with a high yield output. Poppy, powerful, and extremely durable, MAGIC BEAN™ resin yields much stronger and more rigid qualities allowing a decrease in the wood core thickness. This means you get a lighter board while achieving higher energy return.

Full ABS1000 Sidewalls

Quantum Drive™ Base – The QUANTUM DRIVE™ running base is formulated with a progressive blend of compressed ultra-high-molecular-weight polyethylene. As an evolution from the already blazing fast ULTRADRIVE™, this running base features higher density for durability and absorbs more wax to wick longer and ride faster. Properly maintained sintered bases are fast, durable, and are the preferred choice of many high-end enthusiasts worldwide.

360˚ HRC48 Steel Edges

PLT™ Topsheet Technology – PLT™ technology is exclusive to CAPiTA MFG and magically bonds the topsheet to an already pressed snowboard.

PAM16000™ Topsheet with Metallic Underlay

Multitech™ Level 4 DeepSpace™ Silkscreen – The DEEPSPACE™ Design Theory takes advantage of the thickness of a transparent topsheet. Strategically layering ink on multiple levels from the top and the bottom imbues graphics with a sense of life through depth.

Die-cut Base Graphic

Stainless Steel 2 x 4 Inserts