350 mm Tip Rocker / 3 mm Camber / 210 mm Flat Tail Rocker

Flex Rating – 7 (1 Soft - 10 Stiff)

Elliptical Sidecut – Made up of a longer radius underfoot and shorter radii in the tip and tail of the ski. The long radius underfoot means you can pivot faster and easier, while a shorter radius in the tip and tail results in seamless turn initiation. This sidecut allows for a wide variety of turn lengths and angles.

Surf Zones – Unites rocker and tip taper ensuring these two key features work in harmony. Rocker provides float and facilitates pivoting, while a tapered tip moves the widest part of the ski closer to the center and removes unwanted hooking. Surf Zones promise a floaty, seamless ride in all conditions.

Freeride Flat Tail – Traditional flat tail design is built for speed, ultimate edge grip and control throughout charging turns. Brought into the modern day with a slight tail rocker, this shape is easier than ever to slash your turn into a slarve and won't hook up in fresh conditions.

Lightweight Karuba Core – Karuba is an extremely lightweight woodcore with good strength properties. Despite being little-known, Karuba provides a good flex and vibration absorption capabilities without adding weight, making it an ideal wood core for a touring ski that performs just as well on the uphill as on the downhill.

Full Carbon Stringers – Between 8 and 12 strips of carbon, sandwiching either side of the ski's woodcore, are laid unidirectionally, providing extra stability to the ski, without adding weight to the build. Each carbon strip is woven to provide strength and stiffness in all directions.

Titanal Binding Plate – When you're on a day-long touring trip in the backcountry, you need to rely on your gear. Titanal reinforcement plates are laid up on top of the lightweight cores ensuring that your binding screws hold. This one-piece design fits alpine and touring bindings, adding trustworthy durability to these lightweight cores.

Full Strength Sidewall – This construction places strips of protective material along the sides of each core, between the edge and the topsheet. Sidewalls provide the best possible edge hold and stability when the ski is engaged in a turn as well as protecting the wood core, edges and topsheet from impacts and outside damage.

Tip and Tail Cap – Full strength sidewall underfoot, with the topsheet wrapping around the ski so that it meets the edge in the tip and tail. This provides strong protection from impact, boosting the ski's durability, as well as reducing the overall weight of the ski for freestyle or touring needs.

XL 2.5 mm Edges – 7 fractions of a milimeter might no sound like much, but when it comes to edges, it adds up. The 2.5mm edges stack an extra 35% of height on top of the already super-durable 1.8mm edges. This extra steel gives the rider a pair of skis that can take more abuse and last longer.

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.

Triple Pivot Elite Toe – Toe construction with impressive retention when freeriding. The spring in the toe is inserted horizontally and with a sole plate inclined by 5° it provides the highest energy absorption so as to reduce the risk of early release. The large supporting surface optimizes the power transmission and allows for great stresses and strains. In relation to their weight, toes with this technology therefore achieve a never-seen-before performance.

AFD Gliding Plate – All Marker bindings (except the Jester Pro) are equipped with a moveable AFD (Anti Friction Device), allowing a precise release unhindered by dirt, snow, and ice buildup. The type of AFD is matched to the skier type, ensuring perfect functionality from racing to junior and even alpine touring.

Sole.ID – Marker Sole.ID allows Marker Authorized Retailers to adjust Sole ID equipped bindings to every type of adult ski boot sole, from ISO 5355 Alpine to ISO 9523 Touring, with a height adjustable gliding plate (AFD).

Inter Pivot Heel – The stunning heel construction delivers superior holding power for freeriding. The Inter Pivot Heel directs the power forces in the angle of elasticity improving the holding power and reducing pre-releases.

Stand Height – 22 mm

Recommended Skier Weight – 80+ lbs

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.