But fear not - there is plenty to explore...
Shop all Atomic Shop sale AtomicMEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
The Atomic Redster X9 WB Skis + X 12 TL GW Bindings bring Atomic's rich racing pedigree to your local hill, featuring a versatile multi radius sidecut that sits halfway between slalom and giant slalom, and genuine race-inspired Servotec technology for added stability and rebound. This "wide body" model has 10mm more at the waist for improved performance in variable snow, but they're still plenty svelte to whip out for the beer league. When it hasn't snowed in a while and you feel like laying some trenches, this is the setup to reach for.
Active Camber – 100% Camber
Multi Radius Sidecut – This sidecut combines the best of slalom and giant slalom, for playful, agile short turns and smooth long turns on the same ski.
Power Woodcore – A sporty, dynamic ash and poplar woodcore that adds a ton of stability and dampens vibrations at speed.
Titanal Powered – A Titanal layer above and below the core creates supreme shock absorption, strong running stability and high torsional flex.
Structured Topsheet – A structured topsheet massively increases durability and gives a high quality finish.
Full Sidewall – Runs across the full length of the ski for precise steering.
Atomic Base – Atomic uses high-density sintered bases that are fast on any snow, can stand up to anything, and are easy to maintain.
Atomic Edges – Atomic edges are made from steel five times more wear resistant than standard steel, for strength and perfect grip.
Bindings Do Not Come Mounted to Skis – Always have a certified binding technician mount and adjust your bindings.
Includes X 12 TL GW Bindings – DIN Range 4 - 12
Servotec Technology – Developed for Atomic's FIS skis, Servotec uses a tensioned rod and compressed elastomer fittings to improve steering and rebound during turns and provide more stability at speed when you're going straight.
Size (cm) | 152 | 160 | 168 | 176 |
---|---|---|---|---|
Tip Width (mm) | 120.5 | 123 | 125.5 | 128 |
Waist Width (mm) | 75 | 75 | 75 | 75 |
Tail Width (mm) | 104.5 | 107 | 109.5 | 112 |
Turning Radius (m) | 12.3 | 13 | 13.5 | 14.2 |
If you're like a lot of us, you've lusted after the Krypton for years but could never tolerate the narrow last for more than a few minutes. Enter the Dalbello Krypton AX 120 ID Ski Boots and get on with it while allowing your feet a little breathing room. An average 100 mm last and full ID heat moldable liner make all the difference, and allow most average width and volume feet a comfortable fit without drama.
Last: 100 mm – A well designed 100 mm last that fits average to slightly wider feet well.
My Fit System – The Dalbello legendary fit got an upgrade in more than 60% of the boot range thanks to the My Fit System. Liner and shell can now be thermo customized in addition to the pre-molded Contour 4 shell which is included in every My Fit boot.
Contour 4 – Contour 4 creates subtle “comfort zones” at 4 critical fit points: ankle, heel, 5th metatarsal, & navicular. Relief contours molded into the inside lower shell at these 4 points provide a close and accurate fit and minimize the need for shell modifications.
Adjustable Rear Cuff Spoiler – Modular rear boot cuff spoiler adapts the boot cuff to a variety of lower leg shapes. Spoiler permits skiers to increase rear cuff height, add rear support and change forward lean.
Flex: 120 – Stiff but not too stiff, this flex is the perfect compromise between all mountain mobility and big mountain control.
Kinetic Response Tongue – The highly resilient ribbed tongue is available in three different flexes (stiff, medium and soft). All of them stay in permanent contact with the leg and improve the responsiveness and control of the boot's behavior.
ID Max Liner – Fully heat moldable liner using closed cell Intuition foam, thermoformable in only 6 - 12 minutes. They are the lightest and warmest liners for high performing skiers and offer immediate response and energy transmission.
Cabrio Design – The Cabrio design is a 3 piece construction - shell/cuff/tongue – that comfortably secures the foot and lower leg while optimizing smooth and progressive flex. Dalbello’s Cabrio models provide the ultimate in responsive performance to ski your best.
Low Cuff Hinge Point – The low hinging cuff permits the boot cuff to more easily follow the natural anatomic movement of the skier’s legs because it has a longer range of forward and rearward hinging motion. For more efficient walking and gliding. Increased power and control with less energy.
Shell – Polyurethane
Cuff – Polyurethane
Tongue – Polyamide
Twin Axis Adjustable Cuff Alignment – Permits skiers to align the lateral inclination of the upper cuff to the skier’s leg. Using 5mm Hex Tool, rotate the mechanism clockwise, or counterclockwise, to align boot cuff to desired position.
Forward Lean Control – Forward lean control wedges may be inserted between the lower shell and cuff to change forward inclination angle.
Dynalink Heel Retention System – The instep buckle travels in a direct line to the skier's heel, allowing buckle tension to minimize heel lift and sliding.
Micro-Adjustable Aluminum Buckles – A simple turn of a buckle! Micrometer buckles are easy to use for easy fit customization.
Inverted Forefoot Buckle – Forefoot closure buckles (above instep) are inverted to close on top of the bootshell, not on the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions.
Quick Macro Cuff Rack Extension – Extra wide cuff buckle catch can be easily moved into 1 of 3 positions (total range = 30mm) without tools, enhancing the cuff fitting capabilities for a wide variety of leg circumferences and shapes.
40mm Velcro Strap
Dura-Grip Replaceable Soles – Durable high durometer polyurethane compound toes & heels for extended boot sole wear.
Size | 24.5 | 25.5 | 26.5 | 27.5 | 28.5 | 29.5 |
---|---|---|---|---|---|---|
Boot Sole Length (BSL) (mm) | 287 | 297 | 307 | 317 | 327 | 337 |