Skip to Main Content

Dalbello Krypton AX 120 ID Ski Boots 2020

sku# 164217
Dalbello - Krypton AX 120 ID Ski Boots 2020
Model Info
Select Color:
Please select a color
Select Size:
Please select a size
This item qualifies for Free Shipping! Details
00
hr
00
min
00
sec
Order soon for Same Day Shipping! Details

Product Info

If you're like a lot of us, you've lusted after the Krypton for years but could never tolerate the narrow last for more than a few minutes. Enter the Dalbello Krypton AX 120 ID Ski Boots and get on with it while allowing your feet a little breathing room. An average 100 mm last and full ID heat moldable liner make all the difference, and allow most average width and volume feet a comfortable fit without drama.

Product Details

Fit

Last: 100 mmA well designed 100 mm last that fits average to slightly wider feet well.

My Fit SystemThe Dalbello legendary fit got an upgrade in more than 60% of the boot range thanks to the My Fit System. Liner and shell can now be thermo customized in addition to the pre-molded Contour 4 shell which is included in every My Fit boot.

Contour 4Contour 4 creates subtle “comfort zones” at 4 critical fit points: ankle, heel, 5th metatarsal, & navicular. Relief contours molded into the inside lower shell at these 4 points provide a close and accurate fit and minimize the need for shell modifications.

Adjustable Rear Cuff SpoilerModular rear boot cuff spoiler adapts the boot cuff to a variety of lower leg shapes. Spoiler permits skiers to increase rear cuff height, add rear support and change forward lean.

Flex

Flex: 120Stiff but not too stiff, this flex is the perfect compromise between all mountain mobility and big mountain control.

Kinetic Response TongueThe highly resilient ribbed tongue is available in three different flexes (stiff, medium and soft). All of them stay in permanent contact with the leg and improve the responsiveness and control of the boot's behavior.

Liner

ID Max LinerFully heat moldable liner using closed cell Intuition foam, thermoformable in only 6 - 12 minutes. They are the lightest and warmest liners for high performing skiers and offer immediate response and energy transmission.

Shell Materials & Design

Cabrio DesignThe Cabrio design is a 3 piece construction - shell/cuff/tongue – that comfortably secures the foot and lower leg while optimizing smooth and progressive flex. Dalbello’s Cabrio models provide the ultimate in responsive performance to ski your best.

Low Cuff Hinge PointThe low hinging cuff permits the boot cuff to more easily follow the natural anatomic movement of the skier’s legs because it has a longer range of forward and rearward hinging motion. For more efficient walking and gliding. Increased power and control with less energy.

ShellPolyurethane

CuffPolyurethane

TonguePolyamide

Stance

Twin Axis Adjustable Cuff AlignmentPermits skiers to align the lateral inclination of the upper cuff to the skier’s leg. Using 5mm Hex Tool, rotate the mechanism clockwise, or counterclockwise, to align boot cuff to desired position.

Forward Lean ControlForward lean control wedges may be inserted between the lower shell and cuff to change forward inclination angle.

Buckles

Dynalink Heel Retention SystemThe instep buckle travels in a direct line to the skier's heel, allowing buckle tension to minimize heel lift and sliding.

Micro-Adjustable Aluminum BucklesA simple turn of a buckle! Micrometer buckles are easy to use for easy fit customization.

Inverted Forefoot BuckleForefoot closure buckles (above instep) are inverted to close on top of the bootshell, not on the side. The top closure positioning prevents buckle breakage and bending during rail slides, grinds, falls, and transitions.

Quick Macro Cuff Rack ExtensionExtra wide cuff buckle catch can be easily moved into 1 of 3 positions (total range = 30mm) without tools, enhancing the cuff fitting capabilities for a wide variety of leg circumferences and shapes.

Power Strap

40 mm Velcro Strap

Sole

Dura-Grip Replaceable SolesDurable high durometer polyurethane compound toes & heels for extended boot sole wear.

Specs

  • Ability Level: Advanced-Expert More 
  • Ski Boot Flex: Stiff
  • Forefoot Width: 100 mm
  • Liner Type: Custom
  • Flex Index: 120
  • Boot Sole Type: Alpine DIN (ISO 5355)
  • Includes Tech Fittings: No
  • Number of Buckles: 3
  • Warranty: 1 Year
Size 24.5 25.5 26.5 27.5 28.5 29.5
Boot Sole Length (BSL) (mm) 287 297 307 317 327 337

Reviews

Q&A

Got a question about this product?

Related Buying Guides

;
icon-returns icon-ruler icon-ruler-mini icon-compatibility icon-location