To ensure proper fit, it's important to know the depth of your receiver. Determine this by doing the following:
• With a ruler inserted in the receiver, measure from the center of the hitch mounting hole to the point where you make
contact with an obstacle. This is Fit Measurement A.
• If you do not contact a back-stop or your hitch receiver does not have a backstop, another potential point of contact
could be an undercarriage-mounted spare tire or the undercarriage itself.
• Using the table below, compare your measurement to see which hitch racks will work with your vehicle. Your Fit
Measurement A must be equal to or greater than the product measurement listed in the table below for a proper fit.
Yakima Rack | Fit Measurement A |
Bighorn 1.25" / 30 mm | Min. 1.5" / 38 mm |
BigHorn 2" / 50 mm | Min. 3" / 76 mm |
DoubleDown 2 / 4 / 5 | 1.6" / 41 mm |
DoubleDown Ace 2 / 4 / 5 | 1.6" / 41 mm |
FullSwing | 1.5" / 38 mm |
FullTilt 4 / 5 | 3" / 76 mm |
Highlite | Min. 1.5" / 38 mm |
Holdup 1.25" / 30 mm | Min. 2" / 51 mm |
Holdup 2" / 50 mm | Min. 3" ' 76 mm |
Kingpin 2 / 4 / 5 | Min. 1.5" / 38 mm |
RidgeBack 2 / 4 / 5 | 1.5" / 38 mm |
Stickup | Min. 2" / 51 mm |
SwingDaddy | Min. 3" / 76 mm |