Tour Mode
Interface - A wide support cradle increase tour mode rigidity, while an offset cradle allows snow to clear during entry. Tour mode clip locks binding's sleeved touring pin in cradle for the most secure touring connection possible.
Dual Height Riser Base - Adjust your riser angle with Dual Risers for the perfect fit. 70 mm climbing wire comes standard with optional 55 mm and 85 mm climbing wires availiable.
Axle System - Independent sleeves that rotate freely on a fixed through axle (similar to a bike axle) for the stiffest and smoothest touring pivot
Quick release touring bracket allows for quickest and simplest transition.
No removable parts ensures you won't loose any key components.
Baseplate
Cored Out Heelcup - Made from a high strength Aluminum Alloy that is over 2x stronger then standard Aluminum, which is cored out by CNC to remove unnecessary material to maximize the strength-to-weight ratio
Raised Heelcup Side Wall - High sidewall supports boot for better power transfer and grip while side hilling. The flared sidewall cups boots for a better fit.
Five spring-loaded attachment points create a solid connection between the bindings and Ride Mode Interface.
Aluminum Harware - 1/3 the weight of Stainless Steel and 2x as strong
Heel stay pins push through attachment loops driving snow and ice build-up out of the way.
Wide contact points to improve responsiveness between the bindings and board
Highback
Carbon Fiber Highback - Featherweight performance due to the biaxial weave carbon fiber and multi-layer composite layup, which gives you optimal combination of stiffness and comfort
Quick Adjust Forward Lean - Spin between your desired ride mode forward lean and -5˚ forward lean for skinning.
Additional Features
Titanium Pins - 1/2 the weight of stainless steel pins and 3 times stronger
Uses existing splitboard hole pattern or comes with DIY mounting template
