A wild graphic isn't the only thing fresh and new for the 2016 CAPiTA Charlie Slasher Snowboard - it is also updated with a load of pow slashing features for the steep and deep. Rocker in the nose to flat for high speed turning stability and carbon fiber beams for plenty of pop for those days calling for a cliff drop or two. Complete with a sustainable wood core that features a centerline of ABS material so you can cut the C. Slasher into a DIY splitboard and not leave any exposed wood, the Charlie Slasher is something gnarly riders everywhere will fully appreciate.
Pow Flatkick Flat with rocker at the outside, the front binding allows your nose to float above the snow. Since it is predominantly flat, the board retains power and stability throughout the tail to stomp landings and slash.
Flex Rating: 6 (1 Soft - 10 Stiff) This mildly stiff flexing snowboard offers a responsive, fun and agile freestyle-oriented ride you can take anywhere.
Radical + Tapered Tail The tail was engineered specifically for deep powder riding, and the radial sidecut is complemented by the tapered tail. The narrower tail section naturally sinks in the powder while the wider nose section floats above the snow line. The result is less work and more fun as the board surfs on one smooth continual arc.
RFC Sustainable Touring Core™ Featuring a split-ready ABS centerline, this core allows you to keep your C. Slasher intact as a powder machine or to split it down the middle into a touring set, without risking water damage to the core. This is combined with CAPiTA's RFC Sustainable Core™ that is made with a single species of Poplar grain, creating a smooth and consistent ride. The wood has no knots or joints to ensure you have a responsive ride with a uniform flex pattern.
Dynaweave | 2 x 30 mm Carbon Fiber Beams A resin/glass application that gives you a lighter board while achieving a much higher energy return.This weave features Triax glass on the top of the core and biaxial beneath, creating more response while increasing strength and durability. Dual beams of carbon run parallel to the edges for ample pop and board feel.
Full ABS Sidewalls with Silkscreen Graphics
Wax Infused Rotation Sintered Base + Titanal Base Inlay These bases are created by taking pellets of ultra-high-molecular-weight Polyethylene and compressing them through heat and pressure. The minuscule spaces left behind absorb wax and allow for extended periods of high-speed shredding as the wax wicks to the surface while you ride. This prevents your base from drying out and keeps the surface feeling freshly waxed throughout the day. Properly maintained sintered bases are fast and durable.
Die-cut Base | Multitech™ Silkscreen Base color displayed may not be available. Base colors may vary.
360˚ Steel Edges
Multitech™ Silkscreen Woodgrain Veneer + PLT Topsheet Technology The environmentally-conscious PLT technology reduces the need for harmful chemicals while creating a high-quality and glossy metallic topsheet.
Sublimation Base & Topsheet A graphic technology where the ink is pushed through a substrate into base material using pressure and heat. This creates a very vibrant graphic.
4 x 2 Inserts
|Effective Edge (mm)||1168||1200||1231.5||1252.5|
|Tip Width (mm)||299||305||308||312|
|Waist Width (mm)||250||256||258||261|
|Tail Width (mm)||276||283||285||290|
|Sidecut Radius (m)||8.8||9.2||9.4||9.5|
|Stance Setback (in)||1||1||1||1|
|Stance Range (in)||24.8||24.8||25.2||25.8|
|Stance Range (mm)||62.9||62.9||63.9||65.5|