Large ambitions need to be matched with the Bataleon Goliath+ Snowboard. If you ride hard, you're going to want a solid ride strapped to your feet and the Goliath+ brings the heaviest tech Bataleon has to offer. Pow stashes, jib lines, steep trails and the like are in for a butt-kicking with the Freestyle 3BT profile and medium flex that stretches the versatility so you never have to hold back. A sintered base puts speed on your side, so you can fly across flats and clear knuckles with ease. Armored with Carbon Enhanced and Kevlar Fleece, the Goliath+ is a soldier for the ages. Season after season, dominate the snow with the Bataleon Goliath+ Snowboard.
Freestyle 3BT A team favorite when it comes to all mountain freestyle riding. With the side base and center base equally wide, this flavor is easily the most versatile 3BT Bataleon makes. It enables a powerful and reactive ride with freestyle tendencies and powder float.
99% Twin The nose is 1 cm longer than the tail.
Sidebase Uplift Tip: Medium Uplift | Tail: Medium Uplift
Core Core Full poplar with beech hardwood laid tip to tail along the inserts to enhance the board's jib, jump and freestyle riding attributes. The added beech hardwood strengthens the board's backbone and puts out potent pop while still offering a comfortable lateral flex.
TriAx Bataleon's traditional and time-tested three-way weave of fiberglass, made light, strong and responsive.
Carbon Kevlar Kevlar can stop a speeding bullet and also make your snowboard lighter and snappier in similar ways as carbon. It is used in different ways to fine-tune a board's ride characteristics.
Carbon Stringers Carbon is feather light and adds explosive pop, precise edge control, reactive response and smooth dampening to a board. It is used in different ways to fine-tune a board's ride characteristics.
Sintered Base Hard and fast. Sintered base material is tough stuff and its microscopic pores retain wax nuggets for a slick slide. To get the maximum benefits from a sintered base it needs to be waxed regularly. Bataleon finishes theirs with a proper hot wax before they leave the factory.
2 x 4 Inserts
|Effective Edge (mm)||1150||1170||1180||1190||1180||1200||1210||1230|
|Waist Width (mm)||249||251||252||254||263||265||256||268|
|Sidecut Radius (m)||7.70||7.80||7.90||7.95||7.90||8.00||8.05||8.15|
|Stance Setback (mm)||0||0||0||0||0||0||0||0|
|Stance Range (mm)||485 - 605||490 - 610||495 - 615||495 - 615||495 - 615||500 - 620||500 - 620||505 - 625|
|Rider Weight (lbs)||115 - 165||125 - 175||130 - 180||135 - 185||135 - 195||145 - 200||145+||150+|