The Global Warmer is just too hot to touch. It's Park 3BT rocker profile, carbon enhanced core, and ultra-speedy sintered base earns it a 10 in nearly every category of mountain slaying. Expect deep turns, face shots, presses, air time, jibs, spins and a can-do attitude to jam pack it all into your runs. Over the funbox, down the side-chutes and in the trees, the Global Warmer is going to bring hot fire to your riding. Riders of all skill sets can get down with the Bataleon Global Warmer Snowboard.
Park 3BT Bataleon developed their Park 3BT to be playful yet stable with a wide centerbase, slight camber and true twin shape to perform in terrain parks around the globe. The edge uplift areas start mid-binding and extend towards the tips for a loose feel with less bite. The wide centerbase on the other hand helps with stability off lips, on landings, in presses and at high speeds.
Flex Rating: 3 (1 Soft - 10 Stiff) Soft-medium flex for a playful, buttery feel. A little stiffer than the Disaster to help performance on large airs and secure landings.
Core Core Dual density full wood core composed of poplar with beech running tip to tail along the insert packs. The added beech hardwood strengthens the board's backbone under the bindings and produces more pop from tip to tail while still offering a comfortable lateral flex.
Carbon Enhanced Carbon adds explosive snap, precise control, smooth dampening and it's feather light. Bataleon uses it to enhance the ride of their high-end boards. By placing Carbon stringers in key areas of the board they are able to increase the connection between the rails of your board making it feel more responsive.
Bi Ax Laminate Bataleon bi-axial or two-way fiberglass is a 90-degree weave of fiberglass placed under and atop the core to strengthen and add pop to the board. Fiberglass is placed at a 45-degree angle rather than a 90-degree angle to the edge so you get better overall board feel, flex and edging. Bi-ax layups create a really maneuverable board, one that you can almost steer with your feet.
Sintered Base Hard and fast. Sintered base material is tough stuff and its microscopic pores retain wax nuggets for a slick slide. To get the maximum benefits from a sintered base it needs to be waxed regularly. Bataleon finishes theirs with a proper hot wax before they leave the factory.
Die-Cut Base Base color displayed may not be available. Base colors may vary.
2 x 4 Inserts
|Effective Edge (mm)||1160||1180|
|Tip Width (mm)||291||293|
|Waist Width (mm)||250||252|
|Tail Width (mm)||291||293|
|Sidecut Radius (m)||7.6||7.7|
|Stance Setback (mm)||0||0|
|Stance Range (mm)||510-630||515-635|