Concrete, steel, and death gaps are all a recipes for disaster, so hop on the Bataleon
Disaster Snowboard and cook up some mean jibs and handle those disasters like a boss. Soft playful flex mixed in with the Jib TBT makes the Disaster a solid jib stick. Jib TBT gives you an overall loose feel due to the slightly lifted edges in the nose and tail, which is complimented nicely by a mild camber. This gives the board a great pop while still have a loose and forgiving feel, great for locking onto rails and jibs. Bless your local rail, statue, or wall with the worthy Bataleon
Triple Base Technology (TBT) - Triple Base Technology divides the nose and tail area into 3 parts: 1. The left sidebase for turning left. 2. The center flat middle base for going straight. 3. The right sidebase for turning right. Combining a full tip to tail classic camber with a rail to rail concave, it gives the looseness of a rocker shape board with the pop and response of camber. On edge, the camber is loaded and ready to pop you into your next turn. Meanwhile, the edge is fully engaged with a solid power distribution along a smooth edge curve.
Flex Rating: 2 - A soft flex, designed for jibing and taking on urban features. 2-3-2. Slightly stiffer waist versus the tip and tail. Great for pressing, sliding, and urban jibbing.
Jib TBT - Jib TBT is great for jibbing and urban riding. The TBT is completely symmetrical about the nose and tail. The profile of these boards is trapezoidal giving a slightly cambered overall shape. On the center base section, instead of a smoothly curved camber there are three flat sections: The boards are flat between the feet with two flat sections at the nose and tail and are angled slightly so that the center section is raised off the floor slightly when it is not under pressure. this allows the board to carve like a camber and press like a rocker! On the side bases, the TBT uplift begins under your feet for a super loose and forgiving effect, with the TBT uplift angles minimized as works best on rail boards. The extra center flat base width stabilizes your slides and presses.
Twin - Completely symmetrical geometries and flex from tip to tail
Toughcore - Made with pressure bonded wood composite that is very hard to break, yet very flexible. Specially developed to reach a soft jib flex without sacrificing strength.
Bi-Ax Laminate - Bi-ax laminates over and under the wood core include fiberglass layers aligned in two directions at 45 degees to the edges. This creates an easy and forgiving flex, which allows you to really feel the terrain.
Extruded Base - Easy to repair and takes a beating! Low maintenance and still slides well with irregular waxing, not that the guys at Bataleon are condoning anything other than a militant waxing regime (like Rihanna's).
Hammer Edge - Hammer edges are thicker, tougher, stronger and more durable than your average edges. That's good when they are up against metal rails and concrete stairs, but it's also useful when the powder is not quite as deep as it looks!
Wide Pattern 4 x 4 - The 4 x 4 / 16 insert pack allows for a wide range of stances and is great for rocking them extra wide.