Shape
Positive Camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining a solid edge hold.
Construction
With an AR50 side wall, the ABS sidewall meets Cap construction, combining lightweight Cap construction in the tip and tail with ABS sidewall underfoot resulting in enhanced edgehold and significantly lower swing and overall weight.
The Pipe Cleaner has a 2.5 edge, an oversized height and width and the steel heat-treated to a proprietary hardness which helps resist breaking and tearing out from rails, ledges, and other abuse.
The World Cup-inspired Comp base requires higher maintenance but pays for the extra TLC it requires with speed.
The Laminate Matrix consists of three kinds of fiberglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity needed in the appropriate places.
A blend of Carbon/Kevlar stringers run along the tail of the ski to stabilize it, creating a better landing platform, increased snap and added pop.
Flex
The Hybrid Double Zone core is made up of two high density wood stringers that sit along ultralight wood creating a light core with pop and solid edge hold, while keeping swing and overall weight down. ABS layers are pre-installed alongside the core directly underfoot to concentrate the weight of the ski below the boot sole to increase durability and lower swing weight.
Flex Pattern: tip - 5.5, waist - 7.5, tail - 6.5 (out of 10)
Dimensions
16.5m @ 166cm 116/83/106, 17.5m @ 171cm 117/84/107, 19m @ 176cm 118/85/108, 20.5m @ 181cm 119/86/109
Binding Compatibility
We recommend a brake that is equal to the waist width and at most 20mm wider. (brake width = ski width + 20mm)
