Rocker Type
Positive Camber - Traditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge control.
Flex
Softer Flex - Puts less demand on technique to keep your youngster in control
Flex Pattern - Tip: 2, Waist: 4, Tail: 3 (1 = soft; 10 = stiff)
Core
InjectZone Core - Foam injected core that is lightweight, responsive yet dampens out harsh hits from rails, and hard landings
Laminates
Laminate Matrix - Deliberate directional layering of fiberglass dictates flex pattern and torsional rigidity and allows each ski's flex to be precisely tuned. Bi-axial fiberglass runs in an “x” pattern down the ski to control lateral flex; Uni-directional fiberglass controls flex along the length of the ski; Tri-axial fiberglass, with fibers running in three directions, beefs up the center of the ski.
Sidewalls
CAP Construction - This method wraps the wood core with composite fiberglass layers creating a torsion box. The base assembly is inserted into the mold, then the fiberglass wrapped core and top material are added. A variable slant between the base and topsheet creates a super-durable and light ski with a balanced flex.
Base
S7 Base - Armada's toughest base is durable and low maintenance, with a speed additive for quickness.
Edges
1.7 Impact Edge - The edge height and width is deliberately smaller and the steel is heat-treated to a proprietary hardness to increase durability and decrease weight.
Binding Compatibility
Bindings not included
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
