Gather around and listen up: K2
is honored to unveil Sean Pettit’s first, and well-deserved, pro model ski. The K2
Pettitor Skis are freesking beasts, born from the rest of the Factory line, and raised in big mountain powder like Sean himself. This ski has a keen eye for natural takeoffs and is built stiffer than any other ski in the Factory Team series for high-speed stability and soaring into stomped landings off oversized cliff bands. Sean also brought the contact points closer together for a more playful ski with reduced swing weight and maneuverability when hunting smaller game in the trees. The tip and tail Powder Rocker™ preys on deep and variable snow while the 120mm waist not only provides excellent floatation, but also delivers daily versatility thanks to adequate camber underfoot.
Powder Rocker™ - Designed for deep snow with the most elevated tip and longest measurement of rocker, offering skiers a “surfy” feel with enhanced soft-snow performance. The camber region still exists to ensure edge hold in firmer conditions.
Bi-Directional Taper - The tip is wider but closer in width to the tail. This lets the ski perform exceptionally well while skiing in the forward direction, but the taper enables the skier to have similar switch arcs for better and more consistent switch riding.
Powder Tip - Pulls the widest point of the tip further down the ski, which retains float in soft snow, and also minimizes deflection in adverse snow conditions.
Fir/Aspen core - Solid and dense woods known for their inherent strength and durability.
Triaxial Braiding - Consists of braiding fiberglass around the wood core to provide torsional rigidity for added control, making the ski incredibly energetic and responsive.
TwinTech Construction - Increases the durability of K2 sidewall skis by rolling the top material into the sidewall, reducing the angle that is prone to abuse, severely reducing ski to ski impact damage.
**Please note that base colors will alternate and may not arrive exactly as pictured.
Tip/Tail Hardware - Rivets originally designed for durability now have the additional option of attaching K2 Trim To Fit Skins for climbing.
3.5mm Edges are thicker and far more resistant to cracking.
Swap Base - Ski bases are made with inverse colors so that less material is wasted
We recommend a brake width that is equal to the ski waist width and at most 15 mm wider.
K2 products can only be shipped within the U.S.