New for the 12/13 season, Armada
's Magic J Skis are magically sexy with a less tapered, more full-figured shape. The Magic J is the JJ's brawny big brother who hangs at the gym a lot, with a burly 125+ mm waist and with less taper and a slightly longer contact patch. The result is a ski with a longer turning radius that is extremely stable at high speeds, but will still float your boat in sub 10% pow. Magic!
Front and back rocker
Flex Pattern - Tip: 6.5, Waist: 7.5, Tail: 7 (1=soft; 10=stiff)
Tapered Tip and Tail - 5 dimension ski with the tip and tail narrower than the contact points
Dimensions (tip/contact point/waist/contact point/tail) - 137/142/125/139/133 mm (170), 138/143/126/140/134 mm (180), 139/144/127/141/135 mm (190)
Hybrid Ultralight Core - Ultralight core using select wood stringers that have unusually high strength-to-weight ratios, UltraLight cores allow our widest skis to maintain a light-yet-stable feel.
Laminate Matrix - Deliberate directional layering of fiberglass dictates flex pattern and torsional rigidity and allows each ski's flex to be precisely tuned. Bi-axial fiberglass runs in an “x” pattern down the ski to control lateral flex; Uni-directional fiberglass controls flex along the length of the ski; Tri-axial fiberglass, with fibers running in three directions, beefs up the center of the ski.
CK Stringer - Carbon Kevlar combo stringers lie on top of the laminate matrix along the tail to brace the ski. This increases the landing platform, especially when weight is distributed farther back in the ski than intended. It also gives the ski more pop and extends ski life.
AR50 Sidewall Construction - ABS sidewall meets cap construction – the best of both worlds. This engineering method combines the lightweight cap construction in the tip and tail with ABS sidewall underfoot, resulting in enhanced edgehold and significantly lower swing and overall weight.
50/50 Base - A blend of speed and durability, this base is faster than Armada’s S7 base but more rugged than the Comp series.
1.7 Impact Edge - The edge height and width is deliberately smaller and the steel is heat-treated to a proprietary hardness to increase durability and decrease weight.
Bindings not included
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Armada products can only be shipped within the U.S.