You'll need to swap the entire Dynafit Radical FT Base Plate if you want to change the brake width on your Dynafit Radical FT Bindings. The procedure involves loosening the lateral heel adjustment screw cap completely and removing it, pulling out the internal springs and bushing, and taking the heel unit off the pivot post. You can then unscrew the old base plate and brake assembly and replace it with the new one, reassemble the heel, and readjust the release value spring. Be careful replacing the alloy end caps as they strip easily. Sound complicated? Bring it in to a qualified Dynafit dealer and have them do it for you.
Base plate, pivot post and brake assembly in two widths - 110 mm and 130 mm
Compatible with Dynafit Radical FT Bindings
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about Dynafit Radical FT Base Plate w/ Brakes 2015:
I dont know if the above applies to these brakes or not. Well made, light and easy to use. The only con is you have to take the whole top off the heel piece to swap them out so there is the potential to lose parts.