Stay Positive Camber – Rome's Stay Positive Camber boards use traditional camber to the fullest advantage to provide you with camber underfoot reducing the overall contact points of the board. In turn, you get a lively, pop-filled snowboard that performs on everything.

Directional – Designed for set-back stances, with more board in the front of your front foot than in the back of your rear foot, to optimize fast and powerful down-mountain riding.

AirPop Core Maxtrix – Rome's AirPop Core's is made of Poplar wood to add strength and durability while providing you with unprecedented pop.There are five wood sections with varying densities and air channels in order to make the board extremely light.

StraightTriax 45 Laminante – This lamination has 45˚ fibers that deliver the response and power that discerning all-mountain riders need for laying carves and slashing powder. You will hold turns better and pop insanely high.

TurboRods - Carbon Double Barrel – New levels of pop with carbon rods that use kinetic energy.

Z-Tech 2.0 – A 2-inch strip of Zylon down the center-line for added response

SinterSpeed Base – The high-end sintered compound used for Rome's Sinterspeed Base absorb large amounts of wax for days of straight lining pow and bombing the local jump line at extremely high speeds.

Die-Cut Base – Base color displayed may not be available. Base colors may vary.

Rome Snowboards will accommodate 2x4 and 4x4 insert patterns.

Stiff flex for powerful control

V-Rod Baseplate – A V-shaped baseplate with a "rod" of edge-to-edge contact limits the binding's footprint on the board, which delivers three things: natural board flex, greater binding flexibility side-to-side, and full power from toe to heel. You get the perfect blend of flex with pop.

SubBase V-Pad – Partnered with the V-Rod baseplate, the 3D profile of the EVA and rubber sub-base pad fills the lifted corners of the baseplate, creating cushioning for the smoothest side-to-side flex while allowing for a dampening barrier between the baseplate and topsheet.

Targa AntiShock Highback – Designed specifically for Targa bindings with a built-in suspension system where the top section flexes up to 3 degrees before locking out to reduce vibration and absorb shock and the middle bushing acts as a dampening system. This binding is designed for the most aggressive riders.

PF Adjust Ankle Strap – Ultimate customization with two interchangeable EVA inserts for three options of stiffness: extremely flexible, very supportive, and ultra supportive. Designed for the rider who readily adjusts bindings for versatility.

Auto Strap – Rome's signature idea using an elastic band to hold the ankle straps out of the footbed until you are ready to strap in.

ConformGrip Toe Strap – Overmolded TPR grips the toe of your boot for comfort and control, while conforming seamlessly to all models on the market.

Yes, I Can't System – Canting gives you more comfortable wide stances for more power over your nose and tail. Go with 2 degrees or 3.5 degrees of canting, or run 0 degrees if you want to go traditional.

Rome QuickTech Foundation – AutoStrap.2 Technology, QuickStrap.2 Technology, QuickLock Forward Lean

Rome Customization Foundation – Highback rotation, 9 Times Ankle Strap Position, Adjustable Toe and Heel Ramp, Forward Lean

UnderWRap.3 Heel Hoop – Designed for the Targa binding this heel hoop is cored out as much as possible for maximum lightness.