Light, strong, fast - go ahead, pick all three. The Dynafit
TLT Vertical FT Ski Binding is the original burly tech binding and still rules the steep and remote like nobody's bidness. The classic and time-tested Dynafit
toe and rotating heel have been used for decades by the baddest players in backcountry skiing, and you should be using them too. Dynafit
's toe engagement system gives you superior lateral response and the smoothest, quietest touring mode in the industry.
Toepiece - High-strength CrMo steel toe pins and arms with high strength plastic lever
Toe Release Lever - Ratcheting toe release lever should be locked for skinning.
Crampon Slots - Reinforced crampon slots in baseplate for ski crampons
Alloy pivot post with polymer body and stainless steel heel pins
High-strength plastic top plate and lifter
Release - Lateral and Vertical release both originate at the heel, and release values are set with separate screws.
Tour Mode - Heelpiece is rotated to access touring mode and 2 higher climbing levels.
Toe lever should be in locked position for skinning.
One Size Fits All - Binding will adjust to fit all boot sizes.
Dynafit Compatible Boots - Boots with Dynafit toe and heel fittings are required to use this binding.
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
110 mm brakes included
Dynafit products can only be shipped within the U.S.