TLT Radical ST Ski Bindings build on the reputation of the legendary Vertical ST with the addition of increased step-in ease, better resistance to lateral shock at the toe, and super simple flip-up climbing height adjustment that's a breeze with your ski poles. Dynafit
veterans will adjust to the step-in mode immediately and love the flip-up climbing lifters; newcomers will wonder what all the fuss was about!
Radical Toe Piece - Cast alloy baseplate and forged steel toe arms with hardened pins
Side Towers - New Side Towers aid step-in entry and reduce chances of pre-release from lateral shock.
Four screw mounting pattern rather than the traditional 5 hole Dynafit pattern
Crampon Slots - Reinforced crampon slots in baseplate for ski crampons
Toe Release Lever - Ratcheting toe release lever should be locked for skinning.
Alloy pivot post with polymer body and stainless steel heel pins
Integrated sliding Anti-Friction Device (AFD) in brake pad
Release - Lateral and Vertical release both originate at the heel, and release values are set with separate screws.
Speed Step Climbing Bar - New design climbing bar is super easy to adjust while skinning using a ski pole.
Tour mode is accessed for all positions by rotating heel 1/4 turn clockwise. Height adjustment is done by flipping the Speed Step Climbing Bar up or down as needed. On the fly adjustments with a ski pole are simple and precise.
Toe lever should be in locked position for skinning.
Heel should only be rotated in clockwise direction.
Uses Torx 20 screws instead of PoziDrive #3 screws
Dynafit Compatible Boots - Boots with Dynafit toe and heel fittings are required to use this binding.
One Size Fits All - Binding will adjust to fit all boot sizes.
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
130 mm brakes included
Dynafit products can only be shipped within the U.S.