Don't hesitate, stomp the up and smoke the down with the Dynafit TLT Radical FT Ski Bindings. The Radical FT is Dynafit s burliest lightweight offering with release values up to 12 and incorporates a number of changes like toe piece Side Towers for ease of step-in entry and improved resistance to lateral shock and Speed Step climbing bars at the heel, which flip up or down easily with ski poles. The Radical FT also incorporates a Carbon Plate shock absorber system that can be locked to stiffen the ski flex under the binding zone or left unlocked to let the ski flex naturally.
Radical Toe Piece Cast alloy baseplate and forged steel toe arms with hardened pins
Side Towers New Side Towers aid step-in entry and reduce chances of pre-release from lateral shock.
Four screw mounting pattern rather than the traditional 5 hole Dynafit pattern
Toe Release Lever Ratcheting toe release lever should be locked for skinning.
Crampon Slots Reinforced crampon slots in baseplate for ski crampons
Alloy pivot post with polymer body and stainless steel heel pins
Release Lateral and Vertical release both originate at the heel, and release values are set with separate screws.
Speed Step Climbing Bar New design climbing bar is super easy to adjust while skinning using a ski pole.
Integrated sliding Anti-Friction Device (AFD) in brake pad
Tour mode is accessed for all positions by rotating heel 1/4 turn clockwise. Height adjustment is done by flipping the Speed Step Climbing Bar up or down as needed. On the fly adjustments with a ski pole are simple and precise.
Toe lever should be in locked position for skinning.
Heel should only be rotated in clockwise direction.
Compatible with Tech Boots Only Tech toe and heel fittings must be installed in your boots in order to use this binding. If in doubt, ask your ski tech.
Shock Absorber The Radical FT Carbon Plate connecting toe and heel units can function as either a shock absorber (unlocked) or ski stiffener (locked) depending on snow conditions and skier preference
One Size Fits All Binding can be mounted to fit all boot sizes.
Uses Torx 20 screws instead of PoziDrive #3 screws
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.