Hyperlite Forefront Wakeboard – Blem 2009: The Hyperlite Forefront wakeboard takes the next step in enabling riders to advance their skills quickly. Its top deck includes the first ever toeside footbed riser to quicken response time when initiating a toeside carve, while requiring less pressure for a strong edge hold into the wake. With its combination of base and edge features, the Hyperlite Forefront wakeboard is all about control and progression: never before has a board been equipped like this to truly grow with you.
- Special Features:The fin combination adds even stronger toeside edge control, but can be changed out with the included extra set of 0.8” fins once you have mastered the toeside edge. Also features counterbalancing top contours. Molded in toe side footbed risers.
- Rocker and Base Features:.Subtle three-stage rocker allows for smooth carving and large pop without causing unwanted drag. The base of the Forefront features toeside channel extensions further enhancing edging and control.
- Construction:Monocoque Construction, Layered Glass is strong and responsive.
- Rails/Edges:The Forefront includes a variable edge design, transitioning from a softer edge in the mid section to a sharp and eventually turned down rail at the tip and tail.
- New Blem Condition:New Blem products have minor manufacturer blemishes which can be any type of small cosmetic difference from a new board. These blemishes do not affect the integrity or performance of the product. The products are still under the full manufacturer warranty.
Specs
- Tip Width:26.92 cm/10.60 in. (129); 27.17 cm/10.70 in. (134); 27.43 cm/10.80 in. (139); 27.68 cm/10.90 in. (144)
- Waist Width:41.91 cm/16.50 in. (129); 42.41 cm/16.70 in. (134); 42.92 cm/16.90 in. (139); 43.43 cm/17.10 in. (144)
- Ability Level:Intermediate - Advanced
- Construction:PU Foam (Bio 2)
- Fin Configuration:Three molded - in fins on each end (two toeside, one heelside). One 1.3" Disorder fin (toeside) and one 0.8" Poly A - Wing (heelside) on each end. Two extra 0.8" Poly A - Wing fins included (All removeable). Molded in anti - slip fin.
- Rider Weight:Up to 155 lbs. (129); 145 lbs. and up (134); 160 lbs. and up (139); 165 lbs. and up (144)
- Rocker Size:6.32 cm/2.49 in. (129); 6.57 cm/2.59 in. (134); 6.80 cm/2.68 in. (139); 7.06 cm/2.78 in. (144)
- Rocker Type:Subtle three - stage
- Warranty:Lifetime Limited Warranty
Expert Advice
Still not sure about the fit and sizing for this product?
Call us at 866.386.1590
Hyperlite products can only be shipped within the U.S.
Hyperlite Remix Wakeboard Boots (Black) 2009: The
Hyperlite Remix Wakeboard Boots are an all-new design for a very supportive but easy-to-get-into adjustable boot. The
Hyperlite Remix Wakeboard Boots have dual lace zones like much more expensive boots, but the plushness you come to expect from an open-toe. The tongue has a neoprene stretch panel on the medial side where feet are thicker and need the adjustability, but the tongue is fixed on the lateral side where you need the support to land big airs. The
Hyperlite Remix Wakeboard Boot’s new J-bar pads wrap around the ankle bones for a snug fit and eliminate heel lift.
- Flex:The new rear flex zone eliminates hard edges or pinch points against the back of the leg // Whether you ride more rigidly and upright or knees-bent and crouched, the Hyperlite Two Piece Construction forms without a pressure point.
- Fit:The adjustable/fixed floating toe option gives the ability for the Hyperlite Remix Boots to give a customized fit to a variety of riders. // Single Density Footbed
- Liner & Lacing:Dual Quick Cinch Front Lace Zones make lacing up a snap. Adjust the top and bottom laces zones separately for desired fit and support.
Specs
- Ability Level:Intermediate - Advanced
- Warranty:2 Years
Expert Advice
Still not sure about the fit and sizing for this product?
Call us at 866.386.1590
Hyperlite products can only be shipped within the U.S.
