DMC-G (Devinci Monocoque Carbon Gravity) – Enter DMC Gravity technology and a carbon repertoire for rides built to flow fast and smooth in rock-ravaged environments. Mountain-specific Devinci Carbon Monocoque G technology uses cross-hatched and unidirectional carbon fiber layers, bolstered by high-strength epoxy resins and finished with a blast of Nano powder additive. This Devinci-exclusive recipe equates to ultra-lightweight frames, fine-tuned for knockout strength. Stand on the pedals, batten down the hatches, and watch dirt get demolished. DMC G. World Cup annihilator and Steve Smith approved.

Axis Intelligent Link – Devinci Axis Technology marks the pinnacle of dual-suspension production innovation. Precision Quality Control testing results in perfect alignment—every time—that can be felt on the trail, nixing any built-in constraints stemming from the design process.

Full Response Geometry – FRG adjustable technology allows you to customize your ride to personal preference or specific trail type using a flip-flop pivot mechanism that changes the bike's geometry to either a low or high position. FRG bikes are quick and aggressive at lower speeds, with added stability at high speeds. Combined with a super low stand-over height, these agile, FRG bikes deliver precise handling and power transfer that reacts immediately and intuitively to rider input.

Split Pivot – Devinci Cycles was the first bike manufacturer to adopt Dave Weagle’s patented Split Pivot technology. Today it represents the core of Devinci’s full-suspension line-up. The genius of the Split Pivot suspension system is that it works in conjunction with you—the rider—for intuitive performance and a fully customizable feel. It harmonizes and maximizes bump compliance, traction, and efficiency—factors that are normally at odds with each other. The result is a buttery smooth ride with hyperactive small bump compliance and podium-crushing pedal stroke efficiency. The system is called Split Pivot because of its concentric rear dropout pivot built in line with the rear wheel axle, but there’s more to it than that.

Rapid Recovery™ – Who doesn't want more available wheel travel for successive hits? The Rapid Recovery System allows the shock to recover faster between consecutive bumps, letting the wheel track the ground with greater precision. This more active suspension system doesn't pack up and enables the bike to ride in a higher and softer part of the spring rate. Rapid Recovery gives the rider access to more available wheel travel, bump after bump, to achieve a smoother and more controlled ride.

Sag Gradients™ – Don’t set your sag correctly, and you might as well be hopping onto someone else’s bike. But why bust out plastic clips or rulers to keep your suspension fine-tuned? Rockshox sag gradients are printed right on the upper tubes and shock damper bodies making perfect suspension setup easy and accurate. So give mom back her plastic clip and ruler.

Solo Air™ – Solo Air is like a Buddhist monk. Its enlightened design lets you add air through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. So they’re always in perfect equilibrium, like Yin and Yang. Giving you a plush, predictable ride you can set up in seconds, with the lightest weight air spring on the market.

Adjustments – External Rebound / Low Speed Compression, 3-Position Compression (Open, Pedal, Lock)

Air Guides™ – Rockshox prints Air Guides on all of their air-sprung forks. Maybe not a technological feat, but it will help you set up your suspension in seconds instead of minutes. And more time on your bike equals more chances to earn King of the Mountain on your favorite trail. Maybe they are a technological feat.

Charger Damper™ – No compromise for lockout: The efficiency circuits (Pedal and Lock) sit behind the performance damping, meaning no sacrifice in bump performance for shredding downhill while keeping the ability to maintain pedaling stability for those leg burning climbs. Extruded bladder design is insanely durable, resists damping change during extended downhills and has virtually zero pressure offset for small bump sensitivity.

Dual Position Air™ – If you want to ride up and walk down, a fork that only does one thing well is great. But you love epic ascents, technical descents, winding single track and everything in between. So you need a fork that tackles it all. Dual Position Air changes your fork’s travel up to 30mm without changing its small bump performance. So, with a simple onboard turn and a click you can switch from climbing like a demon to bombing downhill with confidence.

Maxle Ultimate™ – Basic things like axles are often the easiest to overlook. Put one hand on the Maxle Ultimate, though, and you’ll be glad Rockshox paid serious attention to the finer details. Because one hand is all it takes to remove or install the Maxle Ultimate. Lever-placement personalization is accomplished completely without the use of tools. Available for both front and rear, Maxle Ultimate is the easiest-to-operate axle system in the world. No tools, no worries, so you can concentrate on the trail ahead.

Power Bulge™ – When you need your forearms to be stronger for more control, you bulk them up in the gym. When you need more durability from your fork, bulk them up with SRAM Power Bulge. Other companies just increase the stanchion size adding extra weight. Power Bulge simply reinforces the lower leg to allow for an oversized bushing, increasing stiffness and maximizing your ride. Plus, it’s called Power Bulge.

Rapid Recovery™ – Who doesn't want more available wheel travel for successive hits? The Rapid Recovery System allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision. This more active suspension system doesn't pack up and enables the bike to ride in a higher and softer part of the spring rate. Rapid Recovery gives the rider access to more available wheel travel, bump after bump, to achieve a smoother and more controlled ride.

Integrated Skid Plate

Integrated Cable Routing

X-Actuation™ – Developed specifically for SRAM 1X, X-Actuation keeps shifting sharp and consistent across the entire 10- to 42-tooth cassette.

ZeroLoss™ – ZeroLoss simply means, well, zero loss—when you push on the lever, for an upshift or down shift, the cable is engaged instantly—zero loss of movement. There is no middle-ground where you're waiting for the shift to come. Gear changes are instant and precise.

Cage Lock™ – With Cage Lock™ technology in the rear derailleur, wheel removal and installation—as well as chain installation—becomes faster and simpler. Just pushing the cage forward to create slack and lock it into place.

Roller Bearing Clutch™ – These rear derailleurs deliver maximum drivetrain stability—even through the most punishing terrain. With Roller Bearing Clutch™ technology, derailleur bounce and chain slap are eliminated without sacrificing precision.

X-Horizon™ – The X-Horizon™ rear derailleur’s "straight parallelogram" design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears.

X-Sync™ – X-Sync™ 1X chain rings provide the highest level of performance and durability. The tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync™ chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync™ rings are an integral part of the SRAM 1X™ drivetrain.

BB30 – Besides serious weight savings, this bottom bracket means narrow Q-factor, more ankle clearance, greater bearing durability and stronger crank construction.

GXP® – GXP’s Gutter Seal design cuts friction and weight—improving both feel and performance.

Contact Point Adjustment™ – Some people like the instantaneous power of a short lever throw. Others prefer the feel of a longer throw. With Contact Point Adjust, you can pick the position you want your fingers to be in when your brakes are engaged. It’s a quick and easy way to customize the feel of your brakes without having to move the pads. It’s also a way to balance both brake levers to feel exactly the same.

Lever Pivot Bearings – Precision sealed bearings at the lever pivot enhance the clean, crisp lever actuation and consistent, light, one-finger feel.

PiggyBack™ Reservoir – The brake fluid reservoir on SRAM’s latest lever design is optimized for both performance and ease of use. The PiggyBack Reservoir offers a simple, failsafe way to manage brake fluid, and also allows for ambidextrous lever placement—so you can switch your levers on the handlebar and run them moto without hassle.

PURE™ Bladder – SRAM’s new brake lever design includes a reshaped bladder, called Pure, that helps regulate and reduce air bubbles. The bladder is specifically shaped to evacuate air from the lever and push the fluid exactly where it’s needed. The result is improved back-pressure relief, which produces dependable braking power and consistency.

Reach Adjust – Brake lever fit and feel is a personal thing. Riders have individual positioning preferences, as well as unique hand sizes and finger lengths. Reach Adjust makes it easy to adjust your lever for maximum one-finger control for everyone.

SwingLink™ – Squeeze a new SRAM brake lever and you notice it immediately. Less deadband. More positive pad engagement. A new cam system requires less lever throw to push the pads toward the rotor. That’s great, but there’s more to perfect braking performance than just power. You need control. Many brake systems minimize deadband—but at the cost of modulation. SwingLink solves that with its special cam shape. When the pads contact the rotor, power is modulated, avoiding that “on/off” brake feel. It’s the perfect balance of power and precision.

Timing Port Closure – A hydraulic brake’s timing port is the connection between the reservoir and the master cylinder bore. When the lever is squeezed, a cup seal passes this area and closes the port, which pressurizes the system. SRAM’s new timing port closure system features durable seals and an ultra-smooth cylinder bore finish, producing dependable braking power and consistency.

DT Swiss E1700 – Enduro is highly demanding on riders and their equipment. Low weight is key for relaxed uphills and all out climbs within a stage while maximum stiffness is needed to precisely navigate rock gardens as is tubeless readyness for maximum grip at all times.

Straightpull® Technology – The term Straightpull refers to spokes with no bend at the head. This design allows for an ideal strength to weight ratio when compared to conventional spokes. Due to their more precise alignment and direct trajectory, straight-pull spoke technology creates a stiffer, more responsive wheel.

Spline® Technology – With straight pull spokes and the use of specific lacing, superlight hubs as well as high end rims featuring key DT Swiss technology, SPLINE® wheels make for a perfect training and racing partner.

Schwalbe Hans Dampf Tires – Everything has been tuned for control and maximum riding fun. The tread functions with absolute poise and is well behaved in every situation – like difficult terrain on singletrack. Easy rolling base layer, grippy center and extra-grippy shoulders.

Seat Clamp – Alloy CNC 37mm

Frame Geometry – Quoted frame geometry specs are with the FRG set in the "LO" position.

RockShox Reverb Stealth Seatpost – Connectamajig makes it a breeze to route the hose into the frame when assembling the seatpost on a bike, and allows for several disconnects and reconnects before a system bleed is required. Reverb Stealth is now available with the Connectamajig hydraulic quick-release for the remote control hose.