NoHang-Ups Pop – This camber blends the best of both positive camber and rocker in one board. The Diamond is positive camber, which gives the power and control of camber all the way until 10 mm short of the contact points. Outside the Diamond, 3D Continuous Curvilinear Rocker gives the float and fun of rocker.

Butterout Transition Zones – Rome elongated the transition from the sidecut into the nose and tail to give a smoother feel when landing, spinning or buttering.

Almost Twin – Twin between contact points (what touches the snow is twin), flex is twin and stance is centered in a twin position. Outside of contact points, the nose is slightly longer than the tail for more float in powder

Quickrip Sidecut – Off-set sidecuts for loose fun at slow speeds, and responsive precision at high speeds

SuperPop Core Matrix – Super snappy flex through the use of long poplar wood segments and three zones of low-density wood.

StraightTriax 30 Laminate – Straighttriax 30 Laminate takes 30˚ fibers to deliver response for handling all terrain and flex for a park-friendly feel.

Z-Tech 1.0 – Rome added a centerline band of Zylon to enhance the snowboards power. Zylon is a fiber that is lightweight, snappy, and extremely strong. The result of placing a 1" strip of Zylon increases your ollie pop without increasing the snowboards stiffness.

TurboRods - Carbon Single Barrel – New levels of pop with carbon rods that use kinetic energy.

SinterTrue Base – Strong and wax absorbent, this is the first level of speed through the power of a sintered base. All the speed you need for daily park riding or racing for the untracked lines

Die-Cut Base – Base color displayed may not be available. Base colors may vary.

Rome Snowboards will accommodate 2x4 and 4x4 insert patterns.

Medium Flex – The Boss has the perfect combination of playfulness and power. This medium flex gives you the power you need for freeriding and the flexibility you want for freestyle.

V-Rod Baseplate – A V-shaped baseplate with a "rod" of edge-to-edge contact limits the binding's footprint on the board, which delivers three things: natural board flex, greater binding flexibility side-to-side, and full power from toe to heel. You get the perfect blend of flex with pop.

SubBase V-Pad – Partnered with the V-Rod baseplate, the 3D profile of the EVA and rubber sub-base pad fills the lifted corners of the baseplate, creating cushioning for the smoothest side-to-side flex while allowing for a dampening barrier between the baseplate and topsheet.

Mob Highback – Slightly shorter and rounded near the top to create a playful support level that is needed for a skate feel that is lighter and has ample flex. Designed for freestyle and street riding.

Cant-In-The-Back – Customization for control and comfort by adjusting the highback angle to match the natural curvature of your stance. Rider has choice between 3 and 6 degrees of highback canting.

Forward Lean Adjustment – Forward Lean Adjustment consists of an adjustment mechanism located on the back of the highback for customized forward lean.

Contour Boss Ankle Strap – Rome has designed the Contour Boss Ankle Strap with new materials to conform over the ankle with double the cushion for support and comfort that is unmatched by any other, and solidifies its versatility in flex for all types of shred.

ConformGrip Toe Strap – Overmolded TPR grips the toe of your boot for comfort and control, while conforming seamlessly to all models on the market.

Yes, I Can't System – Canting gives you more comfortable wide stances for more power over your nose and tail. Go with 3.5 degrees of canting, or run 0 degrees if you want to go traditional.

Rome QuickTech Foundation – AutoStrap.2 Technology, QuickStrap.2 Technology, QuickLock Forward Lean

Rome Customization Foundation – Highback rotation, 9 Times Ankle Strap Position, Adjustable Toe and Heel Ramp, Forward Lean