Ripsaw Rocker Profile – The Ripsaw Rocker Camber Profile features enhanced cambered areas for aggressive edge hold and tremendous pop while maintaining the versatility of Original Rocker Camber.

Extended Transition Area – A small flat section in the snowboard profile that improves both turn initiation and powder flotation.

Mid Flex

Vario Power Grip Sidecut – Vario Power Grip Sidecut utilizes multiple radiuses creating extra contact points to enhance edge hold. A flat section in the rocker area provides a broad contact point when flexed, however when unbent allows the board to track straight and not catch. Flanking this straight section are two shallow radius which provide the second and third contact points. Towards the ends of the sidecut are deep radius which render quick turn initiation and the final contact points.

Low Profile Tip and Tail – A low profile in the nose and tail of the snowboard maximizes material contact with the snow for more powerful ollie/nollie pop and adds stability to your landings. Low Profile tip/tail also reduces the plowing effect in the nose for better glide to the next feature and superior float when it's deep.

NS SuperLight Wood Core – This core blends extremely light wood with durable hardwood for unmatched strength to weight ratio.

Carbon Max Laminate Technology – Carbon Max Laminate Technology combines an advanced top and base carbon matrix to maximize response and strength where you need it the most. The result is a lightweight yet powerful configuration that provides torsional rigidity and energy transfer without sacrificing control.

Bi-Lite Fiberglass – Bi-Lite combines many of the strength characteristics of STS Advanced fiberglass with an ultra-light glass fiber matrix. This delivers incredible freestyle and freeride performance without sacrificing durability.

Perforated Rocker Pad – Perforated to reduce weight, these thin elastomeric pads are strategically located in the mid-section of the board. This absorbs the vibration between the feet and provides a buffer in the rocker area, which is in continuous contact with the snow.

RDS 2 Damping System – This lightweight system uses three narrower laminated damping layers that provide the perfect combination of vibration absorption and stability. RDS 2 is the perfect balance of freeride stability and freestyle liveliness.

Elastomeric Underfoot Stabilizers – Elastomeric Rubber Stabilizers directly below the mounting area provide optimum vibration absorption and increase high-speed stability while reducing foot fatique.

Harmonic Tip/Tail Damper – Harmonic Dampers in the tip and tail take out a high percentage of residual vibration by quieting the nose and tail. This enhances stability at speed, in variable snow conditions and on board landings without deadening the liveliness and pop of the cambered areas.

Sintered P-Tex Sidewalls – Never Summer was the first snowboard company to use and perfect Sintered P-Tex Sidewalls, and they've never seen one crack. Unlike conventional ABS sidewalls that have a tendency to crack in colder temperatures, Sintered P-Tex Sidewalls maintain their integrity at any temperature.

Durasurf XT Sintered 5501 Base – Crown Plastics has developed an exclusive, super fast, durable sintered base specifically for Never Summer's higher end boards. Just the right amount of graphite has been added making the Durasurf XT Sintered 5501 Base the fastest base NS has ever used.

True Grit Topsheet

2 x 4 Insert Pattern

Flex Rating: 8 (1 Soft - 10 Stiff) – This stiff flex is ideal for freeriders and all-mountain chargers for supreme response and connectivity.

Single Component 30% Short-Glass / Nylon Composite – Slightly more responsive than the Park Blend, yet still plenty playful.

Re:Flex AutoCANT FullBED Cushioning System – Dual-density EVA automatically settles your boot into a natural position regardless of stance width or angles for improved comfort, reduced fatigue, and more direct board control.

B3 Gel – The same cushioning found in Burton's high-end boots for ultimate dampening that's formulated to withstand repeated impacts without breaking down or hardening up in cold temps.

Under-Baseplate Dampening – Eats up vibrations and impacts in a design that expands cushioning while reducing the footprint of the binding on the board for increased flex and feel.

Single Component Construction – The simplicity of a one-piece hi-back means immediate response. Using Burton's book of material secrets, they can manipulate the overall flex profile -- from buttery to responsive.

Canted Living Hinge™ Hi-Back – This exclusive technology eliminates hardware and weight, and allows you to adjust your Forward Lean and hi-back rotation independently.

Heel Hammock – This reinforced rubbery material wraps response around the heel of any boot. Run your straps a little looser and still get lightning fast response out of turns with your heel cradled in complete suspension.

Zero Forward Lean – Riders who prefer a more playful relaxed feel will love Burton's Zero Forward Lean hi-back design element. You can still crank them forward for the pipe or gnarly carving.

DialFLAD™ – The higher the Forward Lean angle on your hi-backs, the quicker your heel-edge turns. Crank ’em forward for icy hits in the pipe, or back ’em off for jibbing.

Asym Hammockstrap™ – Featuring the same minimal and seamlessly comfortable design as the Hammockstrap, this asymmetrical pad and spine shape wraps the boot in response. Flip the straps for increased freedom, or run stock for power and support.

Flex Slider – Makes strapping in a breeze with a strategically stretched hinging zone that allows the heel strap to flex and fall fully open. Thanks to the science of forced molecular alignment, the Flex Slider is also stronger, making it worthy of Burton's Limited Lifetime Warranty.

Supergrip Capstrap™ – This minimalist design merges two materials into one technologically advanced toe strap. A firmer material in the spine provides a supportive and lightweight skeleton, while a softer over-molded material improves boot wrap and comfort.

Double Take Buckles w/ Insta-Click – Be the first to drop in with the rapid ratcheting of Burton's Double Take Buckles. Helical teeth and "Insta-Click" engagement combine for increased torque per crank, faster uptake, and fewer cranks to tightness. The result: vastly improved strength, speed, and ease-of-use.

Women's Specific True Fit™ – Enjoy a more harmonious connection with Burton’s True Fit™ women’s boards, boots, and bindings. True Fit means that every element of your setup—from boot liners to lace guides, baseplate to strap designs, board shapes to flex profiles— are designed and engineered for the way women ride. Because when it fits right, it rides better.

Re-Ground Materials to Reduce Waste

Compatible with All Major Mounting Systems – Please note, the 3D Hinge Disc is required for mounting on 3D systems (not included).