MtnPop Rocker – Rocker between the feet with positive camber in the nose and tail offering plenty of float in powder and the fun and playfulness of rocker while maintaining power and response from the positive camber in the nose and tail

Flex Rating: 8 (1 Soft - 10 Stiff) – A powerful flex for all-mountain riding

Almost Twin – Similar to true twin with the exception being the nose is slightly longer than the tail for better float in powder

QuickRip Sidecut – Advanced sidecut geometry gives a short, playful feel at slower speeds and a longer, faster and more stable feel at higher speeds. The mid-board contact points end the running length at slow speeds and add grip at high speeds.

HotRods: Glass Single Barrel – A thin glass rod is milled into the centerline of the board under the bindings and out towards the nose and tail, which provides more pop, without adding any unwanted stiffness.

SuperPop Core Matrix – Three zones of low-density wood with extended segments of poplar for a light and smooth flex transition and a highly responsive snappy pop feel

PressurePop Technology: Basalt-V – Lightweight earth friendly material made to direct power from under your bindings to immediate contact points with the snow gives snappy turn initiations and power filled pop.

StraightTriax30 – The laminate that covers all the bases, from the park to all-mountain peaks, the 30 degree off-axis fibers set the personality of the board to flex into low speed butters and pop into high speed takeoffs. It provides some extra kick in a slash and maintains your style while getting creative on and off the trails.

Basalt Impact Plates – Thin reinforcements beneath your bindings to increase strength against core compression caused by bindings

SinterSpeed Base – Ultra porous high-end sintered compound absorbs large amounts of wax to maintain high speeds while straight-lining jumps and bombing through powder.

Impact Edges – These thicker edges provide a greater defense against unintentional rocks or intentional pole bonks.

Rome Snowboards will accommodate 2x4 and 4x4 insert patterns.