Positive Camber – Traditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge control.

Stiffer Flex – provides less flex and gives you a greater all mountain range.

Flex Pattern - Tip: 7 Waist: 8 Tail: 7.5 (1=soft; 10=stiff)

Fleet Core – Laminated wood core with 2 high density wood stringers, and with a slow sidewall taper to 45 degrees toward the tips and tails. This eases entry and exit into and out of turns for lighter riders.

Laminate Matrix – Deliberate directional layering of fiberglass dictates flex pattern and torsional rigidity and allows each ski's flex to be precisely tuned. Bi-axial fiberglass runs in an “x” pattern down the ski to control lateral flex; Uni-directional fiberglass controls flex along the length of the ski; Tri-axial fiberglass, with fibers running in three directions, beefs up the center of the ski.

ABS Sidewall Construction – A full sidewall construction of two strips of ABS material lie directly alongside the core and over the ski’s edges, providing solid edge hold, core protection, and stability.

CAP Construction – This method wraps the wood core with composite fiberglass layers creating a torsion box. The base assembly is inserted into the mold, then the fiberglass wrapped core and top material are added. A variable slant between the base and topsheet creates a super-durable and light ski with a balanced flex.

S7 Base – Armada's toughest base is durable and low maintenance, with a speed additive for quickness.

2.5 Impact Edge – This edge has an oversized height and width, and the steel is heat-treated to a proprietary hardness, which helps resist breaking and tearing out from rails, ledges and any other abuse it might meet.

Bindings not included

We recommend a brake width equal to or at most 15 mm wider than the ski waist width.