MEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
The Salomon Bellevue Split is the most sustainable freeride package. The reduced profile is built for fast uphill travel, so you can get to the top first and experience the best, untracked lines. Powder Camber provides extra float in the nose and controlled camber underfoot and the kit comes with Plum Hardware and pre-cut, cult-favorite Pomoca Skins. The base, top sheet, resins, and edges are all recycled or bio-based too, so the board is as light on the planet as it is on your feet.
Backseat Camber – Camber loaded under the back foot for precision and control, with flat segments under the front foot for superior floatation in deep snow. The best of both worlds!
Flex Rating: 4 (1 Soft - 5 Stiff)
Tapered Directional – Tail width is slightly tapered (2-20mm). This loosens up turning initiation and improves floatation in deeper snow without sacrificing edge hold on hardpack.
Quadratic Sidecut – Quadratic sidecuts use 3 or more radii instead of a continuous radial sidecut. The radii of the sidecut is shallower at the ends and deeper in the middle, which promotes easier turn initiation.
Reduced Profile Facilitates Uphill Mobility
Popster – Popster's shaped core profile thins out under foot and thickens outside your bindings before tapering again at tip and tail to maximize the natural snap and pop of wood. Feels like your skateboard kicktail finally connected with your snowboard.
Ghost Green Core – Ghost Green Core components have been selected and designed to optimize pop and reduce weight while utilizing sustainable attributes of a super light paulownia wood.
FSC® Certified Wood Core
Biaxial Medium Density Fiberglass – Medium density European-made fiberglass layers guarantee a consistent quality level, for light and lively boards.
GreenPoxy 28 Resin
ABS Sidewalls – The molecular structure can be described as a concrete bar combining toughness for energy transfer and dampening properties for impact absorption.
100% Recycled Sintered Base – Provides a moderate balance between the speed created by a hard surface and good wax retention.
Fine Stone Finish – Fine stone finish helps speed up in powder or softer snow conditions.
All-Mountain Edge Bevel – A 1° edge holding tune throughout the key parts of the sidecut meets a 2° bevel between the feet. This delivers the most solid edge hold with no hang-ups.
20%-50% Recycled Edges
Castor Bean Bio-Based Topsheet
Custom Pomoca Skins Included
Plum Hooks – PLUM hooks are specifically made for high performance splitboarding. Their asymmetric profile provides a perfect link between all the parts. They are light and easy to use.
Size | 148 | 152 |
---|---|---|
Effective Edge (mm) | 1095 | 112 |
Tip Width (mm) | 29 | 294 |
Waist Width (mm) | 242 | 245 |
Tail Width (mm) | 282 | 286 |
Stance Setback (mm) | 20 | 20 |
Width | Mid-Wide | Mid-Wide |
The Union Explorer Splitboard Bindings are destined for far flung adventures beyond the resort, but the beauty is they ride just like your regular bindings. That means efficient movement on the skin track, followed buy poppy, jibby, surfy goodness on the downhill. Their lightweight and strong construction sacrifices nothing, so much so that Union includes an adapter for your solid. Go out into the backcountry knowing you have top notch hardwear, Union-tough materials, and a smooth feel in the steep and deep.
Spring Loaded Pin System – By combining the standard pin system with the Split System baseplate, Union increases the amount of connection between board and binding. Just one pin changes the mode and locks it into place.
No-Nonsense Touring Mode – For touring, the binding slides into the climbing cradle and is locked into place with the pin.
Integrated Climbing Bar
Ride Mode – For riding, the binding slides onto the baseplate which rotates over the center of the board. The pin slides the through the middle of the baseplate for maximum connection.
Flex Rating – 7/10
SP2 Duraflex CB – This carbon-injected base is stiff and distributes 100% of the energy from edge to edge.
Extruded 3D Aluminum Heelcup
Exoframe 4.0 Ankle Strap – Rapid response, trusted by professional snowboarders.
TS 2.0 Toe Strap with Pin
Tool-Less Adjustability
Magnesium 3.0 Ratchets – Union's proven bombproof ratchet system, Magnesium buckles are light, sleek, and durable on the mountain.
Magnesium S1 with Aluminum Base
EXP2 Duraflex ST – The perfect balance of flex and response for all types of riding.
Split FLAD 2.0 Forward Lean Adjust – Flip between walk and ride mode in an instant.
Fits Standard Splitboard (Voile) Insert Pattern
In The Box – Mounting hardware, Explorer split discs, Explorer Quiver Disk, touring brackets, splitboard strap.
Non-Stick EVA Disk Cover