But fear not - there is plenty to explore...
Shop all Burton Shop sale BurtonMEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
LOWEST PRICE GUARANTEE
Find a better price? We’ll beat it by 5%. See our Price Match Policy.
We get it. You've seen the touring hype and want a piece for yourself -- the allure of slashing pow turns miles from the closest lift is beyond compare. Get the Burton Flight Attendant Splitboard and join the party. This is a powerful directional board with a fully cambered profile, meant to rip hard going forward, and versatile enough to take everything from waist deep blower to an inch of glacial corn in stride.
Directional Camber – This board bend has entry rocker that adds lift to the nose while a camber section under both feet maintains momentum and stability through deep-driving turns and variable conditions. This bend caters to those who like the attributes of traditional camber but want something that will get up to speed and float easier in powder.
Medium Stiff
Directional with 10mm of Taper
Balanced Freeride Geometry – Twin or directional is the age-old question for creative rippers, and Balanced Freeride Geometry ends the debate with setback rocker profile and a sidecut that is centered on your stance to create a twin freestyle feel when riding flat base. On edge it turns tight and quick with the float and prowess expected from a directional deck.
Pro-Tip™ – A tapered tip and tail thickness reduces swing weight for easier mobility.
FSC Certified Super Fly II 700G Splitboard Core – Stronger and lighter woods target specific areas of the core to provide pop, strength, and reduced weight.
Squeezebox – Burton's most versatile Squeezebox profile improves pop and performance through the balance of thicker, more powerful core sections with thinner, more flexible sections. Rider energy is transferred outward from beneath the feet, energizing the tip and tail while making the board snappier, more stable and easier to manipulate.
Triax Fiberglass with Carbon I-Beam
Re-Rez® Composite – Burton's new almost-zero-waste manufacturing process thanks to a material deconstruction called ReRez®. Simply put, it allows Burton to deconstruct the scraps leftover from shaping, sort them, and then return the materials to the recycling stream to be re‑used in other products.
Recycled Sintered WFO – Infusing a specially formulated wax deep into the pores of this extra-absorbent, high-density sintered material results in an ultra-durable base that stays wide open all season and in any condition.
Super Sap Epoxy – A resin formulated with bio-based materials that reduces the carbon footprint by 50% over conventional all-petroleum-based epoxies. Less oil consumption means even less of a carbon footprint per board.
Infinite Ride™ – This Burton-exclusive technology allows maximized pop and strength by overbuilding the board, then putting it in a machine that breaks in the board for you. Whether you choose to ride Flat Top, Flying V™, or Camber, rest assured that with Infinite Ride™ your board will maintain its flex, pop, and feel from the first day forward, season after season.
Split Channel Binding System
Pre-Mounted with Channel-Compatible Pucks
Rides best with the Classic and Hitchhiker Bindings and Burton’s G3 High Traction Climbing Skins.
Additional interface hardware sold separately through www.voile-usa.com.
Size | 154 | 158 | 163 | 168 |
---|---|---|---|---|
Effective Edge (mm) | 1100 | 1140 | 1190 | 1235 |
Tip Width (mm) | 294.4 | 299.9 | 305.8 | 311.5 |
Waist Width (mm) | 248 | 252 | 256 | 260 |
Tail Width (mm) | 284.4 | 289.9 | 295.8 | 301.5 |
Sidecut Radius (m) | 7.3 | 7.6 | 7.9 | 8.2 |
Stance Setback (mm) | 35 | 35 | 35 | 35 |
Stance Range (mm) | 530 | 560 | 560 | 560 |
Rider Weight (lbs) | 120-180 | 150-200 | 180-260 | 180-260+ |
Width | Regular | Regular | Regular | Mid-Wide |
Part of getting to those epic BC lines is having a kit that is up to snuff and the Burton Hitchhiker Splitboard Bindings will be a major piece of any setup. Boasting a burly, yet lightweight aluminum baseplate designed by Spark R&D for climbing convenience and descending confidence. A dual position, single wire ramp adjuster changes angle on the fly when you climb. Going up is half the fun and when going down, fully adjustable straps will lock down your boots into a high performance, single component highback in a flash. If you're ready to break out of the confines of the resort and want gear you can rely on then give the Burton Hitchhiker Splitboard Bindings a ride.
Spark R&D Tesla T1 Single Wire Baseplate – A single fatty wire built into the baseplate switches easily from stowed, to low (12°), to high (18°) climbing positions and back again while touring. Eliminating the second wire saves weight and fiddle time.
Hammockstrap™ – Reactstrap roots in a stitchless construction for ultra-response with minimal materials. The addition of a nylon cross spine equals a more direct connection with the board.
Flex Slider – Makes the ankle straps move out of the way so you can step into the binding without obstruction. Burton's Flex Slider has a Limited Lifetime Warranty.
Supergrip Capstrap™ 2.0 – This minimalist design merges two materials into one technologically advanced toe strap. A firmer material in the spine provides a supportive and lightweight skeleton, while a softer over-molded material improves boot wrap and comfort.
Double Take Buckles w/ Insta-Click – Be the first to drop in with the rapid ratcheting of Burton's Double Take Buckles. Helical teeth and "Insta-Click" engagement combine for increased torque per crank, faster uptake, and fewer cranks to tightness. The result: vastly improved strength, speed, and ease-of-use.
Quick-Adjust FLAD™ – Burton's tool-free forward lean adjustment.
Burton-Designed Single-Component Negative Lean Hi-Back – The simplicity of a one-piece hi-back means immediate response. Through material blends we then manipulate the overall flex profile—from buttery to responsive.
True OTT Hi-Back Padding – Wrapping the upper portion of the hi-back with padding eliminates pesky pressure points.
Mounts directly to 2015 and newer Burton splitboards without any additional hardware needed.
To mount the Hitchhiker Binding to any other splitboard, you must purchase additional hardware, such as Spark R&D Spark Pucks, or pucks from Voile USA. Sold separately.
Crampon Compatability – The new Tesla T1 baseplate is only compatible with the Burton Crampon and Spark Ibex Crampon.
Features Re-Ground Materials to Reduce Waste
Medium-Stiff Flex – Helps with quick, technical maneuvers, even at high speeds. Great for all-mountain carving, powerful freeriding and charging through the terrain park.