But fear not - there is plenty to explore...
Shop all Liquid Force Shop sale Liquid ForceMEMBERSHIP
Earn up to 10% back in rewards. Learn more. Join Free.
Liquid Force Watson Classic Wakeboard 2012: The name says it all… Classic. It’s a truly classic, and legendary shape that never gets old. Watson cut his teeth on this board and built his empire into what it is today. It has all of the necessary tools to take your riding to that next level and has done just that for Watson and others like Bob Soven and Daniel Powers. An aggressive 3-stage rocker for that solid pop off the wake, lifted variable edge rail gives you optimal response and control where you need it, and quad vented channels in the tips generate speed and hold at the same time. Take a spin on the Liquid Force Watson Classic Wakeboard to see what you’ve been missing!
Spiral “V” Double Concave Mid-Section – Design breaks the water for soft landings and initiates and rolls into turns quicker and easier.
Aggressive, Continuous Rocker – Smooth, fluid carves with a high arcing pop. Providing straight up pop and truly compliments the wake to wake rider.
Quad Vented Channels – Channels are placed between the molded fins to vent water through the tip. The water skips over these channels to give lift without disrupting water flow around the fins. Helps generate speed while keeping you pointed in the right direction.
Lifted Variable Edge Rail – Rounded rail in the center for a forgiving feel, sharp rail at the tail for edge control and response.
Small RX Quad Fin Setup: short, low profile blades for low drag and superior control
NEW Liquid Force Exclusive M6 Metric Inserts – Provide the best board to binding hold ever… more threads provide a tighter, and more secure hold
Size (cm) | 130 | 134 | 138 | 142 |
---|---|---|---|---|
Rider Weight (lbs) | 70-140 | 90-170 | 130-210 | 160-250 |
Liquid Force Vantage OT Wakeboard Bindings 2012: The Liquid Force Vantage OT (Open Toe) Wakeboard Bindings provide a responsive ride that advanced riders demand and the ease of use that ALL riders demand. The Velcro closure system allows the rider to fine tune their fit to different riding conditions. Keep it tight for serious technical moves, or loosen it up a bit for rail riding and cruising… it’s your choice.
IPX Chassis – All new, molded Nylon chassis with metal teeth provides the ultimate board/boot connection.
EVA foot-bed – 3D molded foot-bed with ergonomic contours
Contact Liner – Seamless molded, full wrap design and integrated J bars
Zonal Hook-and-Loop Fastener System – 3 strap Hook-and-Loop Fastener system allows you to customize fit.
Impact GEL: – Takes the shock of landings and displaces it from your foot
Articulating Cuff – Fluid forward motion of the upper and lower overlays