The Dynafit Vertical ST Ski Bindings are a classic that have seen countless summits in remote places on every continent; their time-tested design is a marvel of engineering efficiency. Dynafit has continued to refine their best-selling model with improvements to the brake design and rotation control, and everyone from long-time Dynafit veterans to first-time users will appreciate this binding from the very first skin stride.
Toepiece High-strength CrMo steel toe pins and arms with high strength plastic lever
Toe Release Lever Ratcheting toe release lever should be locked for skinning.
Crampon Slots Reinforced crampon slots in baseplate for ski crampons
Alloy pivot post with polymer body and stainless steel heel pins
High-strength plastic top plate and lifter
Release Lateral and Vertical release both originate at the heel, and release values are set with separate screws.
Tour Mode Heelpiece is rotated to access touring mode and 2 higher climbing levels.
Toe lever should be in locked position for skinning.
Dynafit Compatible Boots Boots with Dynafit toe and heel fittings are required to use this binding.
One Size Fits All Binding can be mounted to fit all boot sizes.
We recommend a brake width equal to or at most 15 mm wider than the ski waist width.
Comes with 92 mm wide ski brakes
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 1 customer
Displaying review 1
Comments about Dynafit TLT Vertical ST Ski Bindings 2014:
First pair of Dynafits I have used, and was really excited to try them. They are all they are cracked up to be. By far the best for climbing: lightweight, easy pivot, simple height levers. As someone with previous knee injuries, I was a little nervous about charging on them, but 2 turns in on some Huascarans and I forgot all about what was on my feet. And really that is what you want in a binding, one you don't think about while dipping a hip and letting 'em rip. I still don't think I would ski resort with them, but it is definitely the way to go for touring.