Radical Toe Piece - Cast alloy baseplate and forged steel toe arms with hardened pins
Side Towers - New Side Towers aid step-in entry and reduce chances of pre-release from lateral shock.
Four screw mounting pattern rather than the traditional 5 hole Dynafit pattern
Crampon Slots - Reinforced crampon slots in baseplate for ski crampons
Alloy pivot post with polymer body and stainless steel heel pins
Release - Lateral and Vertical release both originate at the heel, and release values are set with separate screws.
Speed Step Climbing Bar - New design climbing bar is super easy to adjust while skinning using a ski pole.
Tour mode is accessed for all positions by rotating heel 1/4 turn clockwise. Height adjustment is done by flipping the Speed Step Climbing Bar up or down as needed. On the fly adjustments with a ski pole are simple and precise.
Toe lever should be in locked position for skinning.
Heel should only be rotated in clockwise direction.
Dynafit Compatible Boots - Boots with Dynafit toe and heel fittings are required to use this binding.
One Size Fits All - Binding will adjust to fit all boot sizes.
Uses Torx 20 screws instead of PoziDrive #3 screws
Not compatible with ski brakes; Dynafit Guide cable leash included
Dynafit products can only be shipped within the U.S.