Set your Ipod to Wu-Tang on repeat and throw on the Full Tilt
B&E Pro Model Ski Boots 2014 as worn by Phil Casabon and Henrik Harlaut. I would like to point out Henrik now has pro skis, boots, pants, gloves, and a jacket so you know his endorsement of these boots must mean something. The FTO shell is the original 3-piece boot design, and is the lightest and closest to the snow giving you unmatched sensitivity with all of your tricks. Plus the Wide-Toe and Active Boot Board are working towards a future where shin and toe bang no longer exist. How exciting is that possibility? :) The answer: VERY!
FTO Shell - This is Full Tilt's original 3-piece boot design. It's their lightest and closest to the snow for the most sensitivity.
Forefoot Width - 99 mm
Flex Rating: 6 (1 Soft - 10 Stiff) - Supportive and playful. A freeride flex that allows you to really stomp and lean with strength.
Pro Intuition® Liner - The most power transfer and responsiveness of any Intuition liner®. All adult Full Tilt boots use authentic Intuition® closed cell foam that is body heat activated to mold 100% to your feet and shell during use, or can be heat molded by a shop in minutes.
Power Wrap - An additional layer of ergonomically shaped High Density Intuition® closed cell foam is wrapped around the outside of the upper liner to provide added energy transfer and horsepower to the shell.
J Bar - A J-shaped piece of foam is added to both sides of the ankle area to dramatically increase ankle hold, keeping your feet perfectly in place for precise control.
Wide Toe - A thinner foam is used in the front of the liner to increase space without sacrificing control in the rest of the liner. This is for people with wider feet or who prefer a little more toe room. Can be handy in the park.
A combination of EVA foam layers quickly conform and mold to your foot. 4mm Open Cell foam is warm and comfy, 2mm Soft Density cross linked foam in between, and 7mm High Density Closed Cell foam is firm and responsive, to boot… pun intended!
3-Piece Design - Full Tilt Boots (depending on model) are up to 2lbs lighter than other boots due to their smart and minimalist 3-piece design. This eliminates heavy overlap.
Ribbed Tongue - 100% Ribbed tongue enables smoother, more natural linear flex from your shin to your toe. The tongue bends like a flexible straw, never bottoming out while providing smooth rebound. Spread the word and ring the city bell: NO MORE SHIN BANG!
Natural Flex - Traditional boots flex with rivets through the cuff that prevent the boot from engaging in a natural flex. Full Tilt Boots get their flex from the unique 7-ribbed tongue, removing the need for rivets through the cuff, allowing for a natural flex. This was originally designed by former NASA engineers after working on space boots that needed to take the impact of jumping 10 feet in the air with 200lb suits on. Tell me that technology isn’t good enough for you.
Infinite Pivot - Unlike traditional boot designs, the rear cuff of Full Tilt boots never bottoms out. It pivots infinitely forward with your calf for less shell distortion, no shin pain and more control.
Easy On/Off - The front of the shell opens a full 90 degrees to slide your foot in and out with ease in all temperatures. It's like putting slippers on!
Ratchet Buckle - Full Tilt's OG adjustment mechanism providing that in-mid-air (Don't actually try that.. but you could) micro adjustment with a lightweight, economical nylon lever construction.
Cables - Full Tilt boots use cable wrap like shoelaces instead of traditional wire bales. Cables give even pressure and increased comfort while eliminating dead spots. Tightening your buckles does not restrict flex, unlike overlap boot designs.
Power Strap - A standard power strap that satisfies all of your needs. Its yellow, and its a power strap. Boom. Get off my lawn.
Rubberheel - Replaceable rubber Rubberheel improves grip and cushion when walking on hard surfaces.
Active Boot Board - Soft rubber layer in the sole of the shell absorbs vibrations, impact and shock for a smooth ride.
Customizable - Full Tilt boots are customizable - all parts are sold separately for unlimited personalization and repair using a standard Philips head screwdriver.
Full Tilt products can only be shipped within the U.S.